Abstract:The paper is devoted to the study of the combustion kinetics and mechanisms of elemental mixtures in the Zr–Mo–Si–B system, as well as the analysis of phase and structural transformations in the combustion wave. A thermodynamic analysis of possible chemical reactions occurring in combustion wave is carried out. In the range of 298–2500 K, the reaction of ZrB 2 formation is preferred. Above 2200 K, the formation of MoB becomes more thermodynamically advantageous compared to MoSi 2 . Estimates of the phase stability of synthesis products have shown that the phases ZrB 2 , MoSi 2 , and MoB are in equilibrium. The experimental dependences T c ( T 0 ) and U c ( T 0 ) are linear, which implies an unchanged combustion mechanism at T 0 = 298–800 K. Preheating leads to an increase in U c . Similarly, the increase in the proportion of Zr and B in the mixture has a similar effect, which increases heat emission and T c . With a minimum content of Zr and B, the interaction of Mo with Si with the formation of MoSi 2 by the mechanism of reaction diffusion is decisive. With an increase in the proportion of Zr and B, the rise of T 0 to 750 K does not affect the T c . The E eff values (50–196 kJ/mol) confirm the significant influence of liquid-phase processes on the combustion kinetics. The mechanism of structure formation has been studied. In the combustion front, a Si–Zr–Mo melt is formed. The primary grains of ZrB 2 and MoB crystallize from this melt as it is saturated with boron. At the same time, the melt spreads over the surface of Zr and Mo particles. This leads to formation of ZrSi x and MoSi x films. Core-shell structures are formed behind the combustion front, which disappear as they move towards the post-combustion zone. The phase composition of the products is formed in the combustion front in less than 0.25 s.

Evolution of particle temperature and internal composition for zirconium burning in air

Experimental study on flames propagating through zirconium particle clouds.

Flame Propagation Characteristic of Zirconium Particle Cloud

Flame Propagation Characteristics and Flame Structures of Zirconium Particle Cloud in a Small-Scale Chamber

Flame Temperature Characteristics of Multi-Tube Injection Combustion of Zirconium-Air Cloud Mixtures

Size Resolved High Temperature Oxidation Kinetics of Nano-Sized Titanium and Zirconium Particles.

On the oxidation and ignition of uranium carbide fragments in air and comparison with zirconium carbide oxidation

High-temperature oxidation and nitridation of substoichiometric zirconium carbide in isothermal air

Phases of Titanium Combustion in Air

Investigation on Thermal Analysis of Binary Zirconium/Oxidant Pyrotechnic Systems

Combustion Behaviour of Fe 2 O 3 -coated Zirconium Particles in Air

One-Chip Solution to Intelligent Robot Control: Implementing Hexapod Subsumption Architecture Using a Contemporary Microprocessor

Flame propagation through zirconium particles coated with different ratios of Fe 3 O 4

Self-Propagating High-Temperature Synthesis of the Heterophase Materials in the Zr–Mo–Si–B System: Kinetics and Mechanisms of Combustion and Structure Formation

Thermal Oxidation Process of Micron Zirconium Powder

Flame Propagation Characteristic of Zirconium Particle and Zirconium Particle Coated with Fe3O4

Flame Propagation Characteristics and Combustion Mechanism of FeOOH-coated Zirconium Particles

Combustion Characteristics of Zirconium Particles Coated with Ferrite Nanoparticles

Flame temperature and propagation speed characteristics of zirconium dust cloud flame propagation in pipelines

Oxidation of Zirconium Diboride–silicon Carbide Ceramics under an Oxygen Partial Pressure of 200 Pa: Formation of Zircon

Oxide-scale Evolution and Dynamic Oxidation Mechanism of ZrB2-SiC in High-Enthalpy Plasma Wind Tunnel