Abstract:A comprehensive matrix of composite poly(ethyleneoxide) (PEO)-based solid-state electrolytes was developed in order to systematically study a number of variables and their impact upon the electrochemical properties of the resulting materials. The different parameters studied in the fabrication of these materials include: (i) the lithium electrolyte salt type, (ii) the ether oxygen to lithium ratio, (iii) the molecular weight of PEO, (iv) the type of ceramic additive used, either aluminum oxide (Al2O3), silicon oxide (SiO2), or titanium oxide (TiO2), (v) the particle size of the additives used, and (vi) the concentration of additive (wt.%). The standard lithium salt used for the preparation of these electrolytes was lithium trifluoromethanesulfonate (lithium triflate or LiSO3CF3), which served as the baseline electrolyte salt. Other lithium salts investigated include: lithium perchlorate (LiClO4) and lithium bis-trifluoromethanesulfonimide (LiN(SO2CF3)2). Conductivity measurements were performed for each electrolyte membrane over a wide temperature range (23–100°C). In addition, cyclic voltammetry measurements were performed on selected PEO membranes as a function of temperature to determine the impact of various parameters upon the electrochemical stability. It was observed that the parameter that displayed the most significant effect upon the PEO-base polymer conductivity was the lithium salt type employed. The lithium triflate salt-containing PEO polymers demonstrated the best mechanical properties before and after heat treatment. Ceramic fillers also appear to enhance the mechanical properties of PEO polymer electrolytes at temperatures above the melting point of PEO (60–70°C). In addition to investigating the electrochemical characteristics of the composite membrane, solid state 7Li NMR characterization was performed to study ionic mobility by measuring spectral line widths and lithium self-diffusion coefficients. It was determined that ceramic nanoparticle additives can enhance the Li+ diffusivity without a corresponding increase in polymer segmental mobility.

Preparation and characterization of PEO-PMMA polymer composite electrolytes doped with nano-Al 2 O 3

Preparation and Performance of Porous Polymer Electrolytes Doped with Nano-Al2O3

Electrochemical and solid state NMR characterization of composite PEO-based polymer electrolytes

Studies on Composite Polymer Electrolyte Peo/Liclo4/Nano-Sio2

Preparation and characterization studies of PMMA–PEO-blend solid polymer electrolytes with SiO2 filler and plasticizer for lithium ion battery

High Electrochemical Stability of a 3D Cross-Linked Network PEO@nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

Conductivity studies on a new composite polymer electrolyte PEO-LiClO4 - Li1.3Al0.3Ti1.7 (PO4)3

New Composite Polymer Electrolyte Comprising Mesoporous Lithium Aluminate Nanosheets and PEO/LiClO4

A New Polymer Electrolyte Based on Poly(ethylene Oxide) Complexed with Li1.3Al0.3Ti1.7(PO4)3 Salt

Study on the Anodic Bonding Mechanism of Polymer Electrolyte and Aluminum Based on MEMS Sensor Package

Silica-assisted cross-linked polymer electrolyte membrane with high electrochemical stability for lithium-ion batteries

Nano-silica doped composite polymer chitosan/poly(ethylene oxide)-based electrolyte with high electrochemical stability suitable for quasi solid-state lithium metal batteries

Ion-conducting polymer electrolyte based on poly(ethylene oxide) complexed with Li1.3Al0.3Ti1.7(PO4)3 salt

Conductivities and Transport Properties of Microporous Molecular Sieves Doped Composite Polymer Electrolyte Used for Lithium Polymer Battery

Preparation and Electrochemical Performance of PEO Based Polymer Electrolyte Containing Pentaerythritol Tetrakis(2-methoxyethyl ether) and Lithium Methoxy Oligo(oxyethylene) sulfate

A Novel PEO-based Composite Polymer Electrolyte with Absorptive Glass Mat for Li-ion Batteries

Nanocomposite Polymer Electrolyte Comprising Peo/Liclo4 and Solid Super Acid: Effect of Sulphated-Zirconia on the Crystallization Kinetics of Peo

In situ prepared nano-crystalline TiO2–poly(methyl methacrylate) hybrid enhanced composite polymer electrolyte for Li-ion batteries

Peo-Licio4-Zsm5 Composite Polymer Electrolyte - I. Electrochemical Study

Aluminum-Lithium Alloy Fillers Enhancing the Room Temperature Performances of Polymer Electrolytes for All-Solid-State Lithium Batteries

Single Ion Solid-State Composite Electrolytes with High Electrochemical Stability Based on A Poly(Perfluoroalkylsulfonyl)-Imide Ionene Polymer