Abstract:Ceramic Li6.55Al0.2La3Zr2O12 (LLZO) is one of the most attractive electrolyte materials for solid-state batteries that combined with metallic Li anodes holds the promise for safer and more energetically dense battery, but its performance is limited by the increases in electrolyte-electrode interfacial resistances upon cycling. The combination of Li + -conducting ceramics and polymers offers a new pathway to create better electrolytes with both high ionic conductivity and good (electro)mechanical interfacial properties. We optimized two-step annealing processing conditions for the fabrication of low temperature cubic-LLZO nanofibers and Li 2 CO 3 removal from the surface of the nanofibers. Using industrially relevant roll-to-roll electrospinning and slot-die coating, we fabricated thin composite membranes with reproducible thickness down to 50 microns. We investigated PEO based composite polymer electrolyte (CPE) with a high, 50 wt% loading of Al-doped LLZO nanofibers in comparison with nanofiber-free PEO electrolyte. XPS measurements show that LLZO is not present at the composite electrolyte surface, and solid electrolyte interphase (SEI) formation is dictated solely by PEO and LiTFSI when reacting with Li metal. Electrochemical SEI formation, studied by cyclic voltammetry, shows SEI formation is identical with and without up to 75 wt% LLZO in the electrolyte. Galvanostatic cycling with lithium symmetric cells shows that the critical current density (CCD) can be tripled by including 50 wt% LLZO, but half cell cycling reveals this comes at the cost of CE. Varying the LLZO loading shows that even a small amount of LLZO drastically lowers the CE, from 88% at 0 wt% LLZO to 77% at just 2 wt% LLZO. Mesoscale modelling reveals that the increase in CCD cannot be explained by an increase in the macroscopic or microscopic stiffness of the electrolyte; only the microstructure of the LLZO nanofibers in the PEO-LiTFSI matrix slows dendrite growth by presenting physical barriers that the dendrites must push or grow around. This tortuous lithium growth mechanism around the LLZO is corroborated with mass spectrometry imaging. Electrochemical impedance spectroscopy (EIS) analysis showed comparable bulk ionic and interfacial resistances with and without nanofibers, indicating that PEO dominates Li + transport and interfacial chemistry. The total Li-ion conductivity of the composite is still governed by the polymer matrix due to high interfacial resistance between the garnet particles and the PEO/LiTFSI matrix. This work highlights important elements to consider in the design of CPEs for high-efficiency lithium metal batteries.

Peo-Licio4-Zsm5 Composite Polymer Electrolyte - I. Electrochemical Study

Electrochemistry Study on PEO-LiClO4-ZSM5 Composite Polymer Electrolyte

PEO-LiClO4-ZSM5 composite polymer electrolyte: II. Effect of ZSM-5 on ionic conductivity

Enhanced electrochemical properties of PEO-based composite polymer electrolyte with shape-selective molecular sieves

High Electrochemical Stability of a 3D Cross-Linked Network PEO@nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

Enhanced Electrochemical Proterties and Optimiazed Li+ Transmission Pathways of PEO/LLZTO‐Based Composite Electrolytes Modified by Supramolecular Combination

Selective Transporting of Lithium Ion by Shape Selective Molecular Sieves ZSM-5 in PEO-Based Composite Polymer Electrolyte

Imidazolium-Type Poly(ionic liquid) Endows the Composite Polymer Electrolyte Membrane with Excellent Interface Compatibility for All-Solid-State Lithium Metal Batteries

Studies on Composite Polymer Electrolyte Peo/Liclo4/Nano-Sio2

Enhanced electrochemical performance of PEO/Li6.4Ga0.2La3Zr2O12 composite polymer electrolytes

Conductivity studies on a new composite polymer electrolyte PEO-LiClO4 - Li1.3Al0.3Ti1.7 (PO4)3

Peo-Liclo4-Zsm5 Composite Polymer Electrolyte (iv): Polarized Optical Microscopy Study

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers

A Novel PEO-based Composite Polymer Electrolyte with Absorptive Glass Mat for Li-ion Batteries

Preparation and Electrochemical Performance of PEO Based Polymer Electrolyte Containing Pentaerythritol Tetrakis(2-methoxyethyl ether) and Lithium Methoxy Oligo(oxyethylene) sulfate

PEO Based Polymer Electrolyte with the Super Ionic Conductor As Filler

Enhanced Electrochemical Performance of Poly(ethylene oxide) Composite Polymer Electrolyte via Incorporating Lithiated Covalent Organic Framework

Nanocomposite Polymer Electrolyte Comprising Peo/Liclo4 and Solid Super Acid: Effect of Sulphated-Zirconia on the Crystallization Kinetics of Peo

Electrospun Polyethylene Oxide (PEO)-Based Composite polymeric nanofiber electrolyte for Li-Metal Battery

Preparation and Electrochemical Performance of Li6.4La3Zr1.4Ta0.6O12/Polymer-Based Solid Composite Electrolyte

Improving Ionic Conductivity with Bimodal-Sized Li7La3Zr2O12 Fillers for Composite Polymer Electrolytes.