Abstract:In this study, a single‐ion conductor polymer, PFPE‐polymer, is prepared and blended with PEO to enhance the lithium‐ion transference number, electrochemical window, and cycling performance of the PEO‐based electrolyte. At 70 °C, the lithium‐ion transference number (tLi+) and the electrochemical window reach 0.72 and 4.7 V, respectively. When tested at a discharge rate of 0.5 C, the Li|PFPE‐SE|LFP cell exhibits a specific capacity of 156.0 mAh g−1, with a capacity retention of 74.3% after 230 cycles, superiority the performance of the electrolyte prepared by mixing PEO with LiTFSI. Solid‐state electrolytes are receiving increasing attention in lithium metal batteries due to the advantage of high energy density. Poly(ethylene oxide) (PEO) electrolyte possesses good compatibility with lithium salts. However, PEO suffers from a low lithium‐ion transference number and poor high‐voltage resistance, which significantly hinder its application in lithium metal batteries. Herein, a perfluoropolyether‐terminated single‐ion polymer (PFPE‐polymer) is designed and synthesized in this contribution. By incorporating the PFPE‐polymer and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) into PEO via casting, the polymer electrolyte (PFPE‐SE) is successfully prepared. Compared to PEO‐based electrolytes, PFPE‐SE forms a solid electrolyte interface (SEI) layer and inhibits the growth of lithium dendrites on the anode. At 70 °C, the lithium‐ion transference number (tLi+) and the electrochemical window reach 0.72 and 4.7 V, respectively. When tested at a discharge rate of 0.5 C, the Li|PFPE‐SE|LFP cell exhibits a specific capacity of 156.0 mAh g−1, with a capacity retention of 74.3% after 230 cycles, superiority the performance of the electrolyte prepared by mixing PEO with LiTFSI. This work presents a promising polymer electrolyte strategy for achieving high‐performance lithium metal batteries, leveraging the in situ construction of the SEI layer and the utilization of a single‐ion polymer.

Silica-assisted cross-linked polymer electrolyte membrane with high electrochemical stability for lithium-ion batteries

High Electrochemical Stability of a 3D Cross-Linked Network PEO@nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

Cyclopropenium Cationic-Based Covalent Organic Polymer-Enhanced Poly(ethylene oxide) Composite Polymer Electrolyte for All-Solid-State Li-S Battery.

High-performance polymer electrolyte membrane modified with isocyanate-grafted Ti3+ doped TiO2 nanowires for lithium batteries

Single Ion Solid-State Composite Electrolytes with High Electrochemical Stability Based on A Poly(Perfluoroalkylsulfonyl)-Imide Ionene Polymer

Nano-silica doped composite polymer chitosan/poly(ethylene oxide)-based electrolyte with high electrochemical stability suitable for quasi solid-state lithium metal batteries

Hollow mesoporous SiO 2 submicro-spheres enabling PEO-based electrolytes with superior electrochemical performance for Li metal batteries

Thermal stable poly-dioxolane based electrolytes via a robust crosslinked network for dendrite-free solid-state li-metal batteries

PEO/hollow Mesoporous Polymer Spheres Composites As Electrolyte for All Solid State Lithium Ion Battery

A High-Performance Self-Reinforced PEO-Based Blend Solid Electrolyte Membrane for Solid-State Lithium Ion Batteries

3D porous PTFE membrane filled with PEO-based electrolyte for all solid-state lithium–sulfur batteries

A Metal-Organic Framework-Modified Single-Ion Conducting Solid Polymer Electrolyte for Lithium-Ion Batteries

Polydopamine Coated Lithium Lanthanum Titanate in Bilayer Membrane Electrolytes for Solid Lithium Batteries

A Dual-Salt Peo-Based Polymer Electrolyte with Cross-Linked Polymer Network for High-Voltage Lithium Metal Batteries

Organic Cationic-Coordinated Perfluoropolymer Electrolytes with Strong Li+-Solvent Interaction for Solid State Li-Metal Batteries

Perfluoropolyether‐terminated Single‐ion Polymer for Enhancing Performance of PEO‐based Solid Polymer Electrolyte

Deionized Water Pretreated Polyimide Nanofiber Membranes as Framework for Polymer Electrolytes Applied to Solid‐State Lithium Metal Batteries

The Versatile Establishment of Charge Storage in Polymer Solid Electrolyte with Enhanced Charge Transfer for LiF‐Rich SEI Generation in Lithium Metal Batteries

Incorporating lithium magnesium silicate into PVDF-HFP based solid electrolyte to achieve advanced solid-state lithium-ion batteries

Synergistic Combination of Crosslinked Polymer and Concentrated Ionic Liquid for Electrolytes with High Stability in Solid-State Lithium Metal Batteries

An initiator-free and solvent-free in-situ self-catalyzed crosslinked polymer electrolyte for all-solid-state lithium-metal batteries