Abstract:Solid-state lithium batteries using solid polymer electrolytes can improve the safety and energy density of batteries. Smoother lithium-ion channels are necessary for solid polymer electrolytes with high ionic conductivity. The porosity and channel structure of the polymer film affect the transfer of lithium ions. However, their controllable synthesis remains a big challenge. Here, we developed a simple synthesis approach toward wrinkled microporous polymer electrolytes by combining the amphoteric (water solubility and organic solubility) polymer in three polymer blends. The homogeneous blend solution spontaneously wrinkled to vertical fold channels as the solvent evaporated. Two minor polymers, poly(vinyl pyrrolidone) (PVP) and polyetherimide (PEI), formed close stacks, and Janus PVP was dispersed in the poly(vinylidene fluoride) (PVDF) matrix. The interfacial tensions between the three polymers were different, so stress was produced when they solidified. The solvent was evaporated to the top layer of the polymers when the temperature increased. The bottom layer wrinkled owing to the stress during solidification. The evaporation of the solvent generated micropores to form the lithium-ion channel. They helped Li+ transference and created a wrinkled microporous PVDF-based polymer electrolyte, which achieved an ionic conductivity of 5.1 × 10–4 S cm–1 and a lithium-ion transference number of 0.51 at room temperature. Meanwhile, the good flame retardancy and tensile strength of the polymer electrolyte film can improve the safety of the battery. At 0.5C and room temperature, the batteries with a LiFePO4 cathode and the wrinkled microporous LiTFSI/PEI/PVP/PVDF electrolyte reached a high discharge specific capacity of 122.1 mAh g–1 at the 100th cycle with a Coulombic efficiency of above 99%. The results of tensile and self-extinguishing tests show that the polymer electrolyte film has good safety application prospects.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c11489.Experimental section and characterization. Figure S1: forcite dynamics temperature. Figure S2: forcite dynamics energies. Figure S3: gyration radius of the simulation. Figure S4: number of lithium ions transferred in the LiTFSI/PVP/PVDF polymer electrolyte. Figure S5: electrochemical stability window of the LiTFSI/PVP/PVDF polymer electrolyte. Figure S6: voltage–specific capacity curve of the first cycle of the Li∥LiTFSI/PEI/PVP/PVDF∥LiFePO4 battery. Figure S7: potential–specific capacity curve of the Li∥LiTFSI/PEI/PVP/PVDF∥Li2TiO3 battery at 0.5C. Figure S8: discharge capacity and efficiency cycle number curve of the Li∥LiTFSI/PEI/PVP/PVDF∥Li2TiO3 battery at 0.5C. Figure S9: TG curve of polymer electrolyte. Figure S10: DTG curve of polymer electrolyte. Table S1: comparison of the discharge specific capacity of the Lia∥LiTFSI/PEI/PVP/PVDFa∥LiFePO4 battery with the previously reported solid-state polymer electrolyte lithium metal batteries at different temperatures and rate capabilities (PDF)This article has not yet been cited by other publications.

Deionized Water Pretreated Polyimide Nanofiber Membranes as Framework for Polymer Electrolytes Applied to Solid‐State Lithium Metal Batteries

Thin Solid Polymer Electrolyte with High‐Strength and Thermal‐Resistant via Incorporating Nanofibrous Polyimide Framework for Stable Lithium Batteries

Organic Cationic-Coordinated Perfluoropolymer Electrolytes with Strong Li+-Solvent Interaction for Solid State Li-Metal Batteries

Solid Polymer Electrolyte Based on Polymerized Ionic Liquid for High Performance All-Solid-State Lithium-Ion Batteries

Three-dimensional Polyimide Nanofiber Framework Reinforced Polymer Electrolyte for All-Solid-state Lithium Metal Battery

Waterborne Polyurethane Micelles Reinforce PEO‐Based Electrolytes for Lithium Metal Batteries

Polyester-enhanced poly (cyclic carbonate-fluoride)-based polymer electrolyte for stable circulating solid lithium batteries

Metal‐Organic Framework‐Derived Elastic Solid Polymer Electrolytes Enabled by Covalent Crosslinking for High‐Performance Lithium Metal Batteries

Ultrathin, flexible, solid polymer composite electrolyte enabled with aligned nanoporous host for lithium batteries

Porous Polyamide Skeleton-Reinforced Solid-State Electrolyte: Enhanced Flexibility, Safety, and Electrochemical Performance

Highly Safe, Ultra‐Thin MOF‐Based Solid Polymer Electrolytes for Superior All‐Solid‐State Lithium‐Metal Battery Performance

Four-armed Branching and Thermally Integrated Imidazolium-Based Polymerized Ionic Liquid As an All-Solid-state Polymer Electrolyte for Lithium Metal Battery

Improving Fast and Safe Transfer of Lithium Ions in Solid-State Lithium Batteries by Porosity and Channel Structure of Polymer Electrolyte

Electrospun polyimide-based fiber membranes as polymer electrolytes for lithium-ion batteries

A Three-Dimensional Co-Continuous Network Structure Polymer Electrolyte with Efficient Ion Transport Channels Enabling Ultralong-Life All Solid-State Lithium Metal Batteries

An Ultrathin Composite Polymer Electrolyte Dual‐Reinforced by a Polymer of Intrinsic Microporosity (PIM‐1) and Poly(tetrafluoroethylene) (PTFE) Porous Membrane

Designing zwitterionic bottlebrush polymers to enable long‐cycling quasi‐solid‐state lithium metal batteries

Imidazolium-Type Poly(ionic liquid) Endows the Composite Polymer Electrolyte Membrane with Excellent Interface Compatibility for All-Solid-State Lithium Metal Batteries

Composite polymer electrolyte incorporating WO3 nanofillers with enhanced performance for dendrite-free solid-state lithium battery

Liberating Lithium Ions from Polymer Matrix via Harnessing Ion‐Dipole Interaction Toward Stable Solid‐State Lithium Metal Batteries

A Locally Solvent-Tethered Polymer Electrolyte for Long-Life Lithium Metal Batteries