Abstract:A comprehensive matrix of composite poly(ethyleneoxide) (PEO)-based solid-state electrolytes was developed in order to systematically study a number of variables and their impact upon the electrochemical properties of the resulting materials. The different parameters studied in the fabrication of these materials include: (i) the lithium electrolyte salt type, (ii) the ether oxygen to lithium ratio, (iii) the molecular weight of PEO, (iv) the type of ceramic additive used, either aluminum oxide (Al2O3), silicon oxide (SiO2), or titanium oxide (TiO2), (v) the particle size of the additives used, and (vi) the concentration of additive (wt.%). The standard lithium salt used for the preparation of these electrolytes was lithium trifluoromethanesulfonate (lithium triflate or LiSO3CF3), which served as the baseline electrolyte salt. Other lithium salts investigated include: lithium perchlorate (LiClO4) and lithium bis-trifluoromethanesulfonimide (LiN(SO2CF3)2). Conductivity measurements were performed for each electrolyte membrane over a wide temperature range (23–100°C). In addition, cyclic voltammetry measurements were performed on selected PEO membranes as a function of temperature to determine the impact of various parameters upon the electrochemical stability. It was observed that the parameter that displayed the most significant effect upon the PEO-base polymer conductivity was the lithium salt type employed. The lithium triflate salt-containing PEO polymers demonstrated the best mechanical properties before and after heat treatment. Ceramic fillers also appear to enhance the mechanical properties of PEO polymer electrolytes at temperatures above the melting point of PEO (60–70°C). In addition to investigating the electrochemical characteristics of the composite membrane, solid state 7Li NMR characterization was performed to study ionic mobility by measuring spectral line widths and lithium self-diffusion coefficients. It was determined that ceramic nanoparticle additives can enhance the Li+ diffusivity without a corresponding increase in polymer segmental mobility.

A New Polymer Electrolyte Based on Poly(ethylene Oxide) Complexed with Li1.3Al0.3Ti1.7(PO4)3 Salt

Ion-conducting polymer electrolyte based on poly(ethylene oxide) complexed with Li1.3Al0.3Ti1.7(PO4)3 salt

Preparation and characterization of PEO-PMMA polymer composite electrolytes doped with nano-Al 2 O 3

Conductivity studies on a new composite polymer electrolyte PEO-LiClO4 - Li1.3Al0.3Ti1.7 (PO4)3

PEO Based Polymer Electrolyte with the Super Ionic Conductor As Filler

Characterization of (peo)liclo4‐li1.3al0.3ti1.7(po4)3 Composite Polymer Electrolytes with Different Molecular Weights of PEO

Novel Polymer Electrolytes Based on Triblock Poly(Ethylene Oxide)-Poly(Propylene Oxide)-Poly(Ethylene Oxide) with Ionically Active Sio2

Polymer electrolyte based on lithium oxalate

Stable Polymer Electrolytes Based on Polyether-Grafted Zno Nanoparticles for All-Solid-State Lithium Batteries

Enhanced Ionic Conductivity of Poly(ethylene Oxide) (PEO) Electrolyte by Adding Mesoporous Molecular Sieve LiAlSBA

Preparation and Electrochemical Performance of PEO Based Polymer Electrolyte Containing Pentaerythritol Tetrakis(2-methoxyethyl ether) and Lithium Methoxy Oligo(oxyethylene) sulfate

Preparation and Conductivity Characteristic of PEO-Li_(1.3)Al_(0.3)Ti_(1.7)(PO_4)_3 Composite Polymer Electrolytes

Peo-Licio4-Zsm5 Composite Polymer Electrolyte - I. Electrochemical Study

Conductivity Studies of Plasticized PEO-Lithium Chlorate–fic Filler Composite Polymer Electrolytes

Co-blending based tribasic PEO-PS-PMMA gel polymer electrolyte for quasi-solid-state lithium metal batteries

Preparation and Characterization of Polymer Electrolyte Based on Comb-Shaped Poly(oxyethylene) with Ether Side Chains

Enhancement of ionic conductivity of PEO based polymer electrolyte by the addition of nanosize ceramic powders

Single Ion Solid-State Composite Electrolytes with High Electrochemical Stability Based on A Poly(Perfluoroalkylsulfonyl)-Imide Ionene Polymer

Electrochemical and solid state NMR characterization of composite PEO-based polymer electrolytes

Studies on Composite Polymer Electrolyte Peo/Liclo4/Nano-Sio2

Fabrication and electrical properties of Li3PO4-based composite electrolyte films