Abstract:Ceramic Li6.55Al0.2La3Zr2O12 (LLZO) is one of the most attractive electrolyte materials for solid-state batteries that combined with metallic Li anodes holds the promise for safer and more energetically dense battery, but its performance is limited by the increases in electrolyte-electrode interfacial resistances upon cycling. The combination of Li + -conducting ceramics and polymers offers a new pathway to create better electrolytes with both high ionic conductivity and good (electro)mechanical interfacial properties. We optimized two-step annealing processing conditions for the fabrication of low temperature cubic-LLZO nanofibers and Li 2 CO 3 removal from the surface of the nanofibers. Using industrially relevant roll-to-roll electrospinning and slot-die coating, we fabricated thin composite membranes with reproducible thickness down to 50 microns. We investigated PEO based composite polymer electrolyte (CPE) with a high, 50 wt% loading of Al-doped LLZO nanofibers in comparison with nanofiber-free PEO electrolyte. XPS measurements show that LLZO is not present at the composite electrolyte surface, and solid electrolyte interphase (SEI) formation is dictated solely by PEO and LiTFSI when reacting with Li metal. Electrochemical SEI formation, studied by cyclic voltammetry, shows SEI formation is identical with and without up to 75 wt% LLZO in the electrolyte. Galvanostatic cycling with lithium symmetric cells shows that the critical current density (CCD) can be tripled by including 50 wt% LLZO, but half cell cycling reveals this comes at the cost of CE. Varying the LLZO loading shows that even a small amount of LLZO drastically lowers the CE, from 88% at 0 wt% LLZO to 77% at just 2 wt% LLZO. Mesoscale modelling reveals that the increase in CCD cannot be explained by an increase in the macroscopic or microscopic stiffness of the electrolyte; only the microstructure of the LLZO nanofibers in the PEO-LiTFSI matrix slows dendrite growth by presenting physical barriers that the dendrites must push or grow around. This tortuous lithium growth mechanism around the LLZO is corroborated with mass spectrometry imaging. Electrochemical impedance spectroscopy (EIS) analysis showed comparable bulk ionic and interfacial resistances with and without nanofibers, indicating that PEO dominates Li + transport and interfacial chemistry. The total Li-ion conductivity of the composite is still governed by the polymer matrix due to high interfacial resistance between the garnet particles and the PEO/LiTFSI matrix. This work highlights important elements to consider in the design of CPEs for high-efficiency lithium metal batteries.

New Composite Polymer Electrolyte Comprising Mesoporous Lithium Aluminate Nanosheets and PEO/LiClO4

Fluorinated boron nitride nanosheet enhanced ultrathin and conductive polymer electrolyte for high‐rate solid‐state lithium metal batteries

Preparation of Poly(ionic Liquid) Composite Quasi-Solid Electrolyte by Incorporating Metal − Organic Framework Filler Decorated with Ionic Liquid for Lithium Batteries

Polyethylene Glycol Functionalized Polyhedral Cage Silsesquioxane As All Solid-State Polymer Electrolyte for Lithium Metal Batteries

Li6.4La3Zr1.4Ta0.6O12/Star-Shaped Hybrid Polyhedral Oligomeric Cage Silsesquioxane Polymer Composite Electrolytes for All-Solid-State Lithium Metal Batteries

High electrochemical stability of a 3D cross-linked network PEO@nano-SiO2 composite polymer electrolyte for lithium metal batterie

Novel Composite Polymer Electrolyte Comprising Poly(ethylene Oxide) and Triblock Copolymer/mesostructured Silica Hybrid Used for Lithium Polymer Battery

Composite Polymer Electrolyte Incorporating Metal-Organic Framework Nanosheets with Improved Electrochemical Stability for All-Solid-State Li Metal Batteries

PEO/hollow Mesoporous Polymer Spheres Composites As Electrolyte for All Solid State Lithium Ion Battery

Excellent Performances of Composite Polymer Electrolytes with Porous Vinyl-Functionalized SiO2 Nanoparticles for Lithium Metal Batteries

Preparation and Conductivity Analysis of LLTO Nanofiber‐Incorporated PEO‐PVDF‐HFP‐LiClO4 Solid Polymer Electrolytes for High‐Voltage Lithium Metal Batteries

Composite polymer electrolyte doped with mesoporous silica SBA-15 for lithium polymer battery

A Polyethylene Oxide Based Electrolyte Enabled by the Synergistic Effect of Active LiGaO2 Filler and Ionic Liquid for Superior Lithium Metal Batteries

3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery

A Novel Composite Microporous Polymer Electrolyte Prepared with Molecule Sieves for Li-ion Batteries

Hexagonal Rodlike Cu-MOF-74-Derived Filler-Reinforced Composite Polymer Electrolyte for High-Performance Solid-State Lithium Batteries

Enhanced Electrochemical Performance Of Poly(Ethylene Oxide) Based Composite Polymer Electrolyte By Incorporation Of Nano-Sized Metal-Organic Framework

Composite Polymer Electrolyte with Vertically Aligned Garnet Scaffolds for Quasi Solid-State Lithium Batteries

Hollow Nanotubular Clay Composited Comb-Like Methoxy Poly(ethylene Glycol) Acrylate Polymer As Solid Polymer Electrolyte for Lithium Metal Batteries

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers

Enhanced Electrochemical Properties of Poly(ethylene Oxide)-Based Composite Polymer Electrolyte with Ordered Mesoporous Materials for Lithium Polymer Battery