Abstract:Graphene is a promising material for many potential applications, owing to its extraordinary properties. Numerous synthesizing approaches have been developed to realize the promising applications of graphene. However, there is lack of a comprehensive way, which combines the following features, i.e. large-area growth, patterned graphene and fast growth at the same time. Here, we provide an engineering approach to both large-area and patterned graphene at a high rate. The high power and continuous-wave lasers were employed to irradiate solid carbon source coated on nickel surface. The rate of graphene production by laser irradiation exceeds 28.8 cm2/min and the solid carbon source is less hazardous compared to typical gaseous carbon sources used in chemical vapor deposition (CVD). The influence of laser process on graphene fabrication was investigated systematically. Raman analyses, optical images and scanning electron microscopy (SEM) results show that the quality of graphene strongly depends on the laser process parameters, including laser power density and scanning rate. Adjusting the parameters to input the appropriate heat, so that the high quality graphene can be obtained in an optimal condition. The influence of carbon source on graphene growth was also investigated. Ultimately, the penetration and precipitation mechanism of carbon into Ni substrate during the fabrication process were also discussed. This approach may reach the scale large enough for practical applications.Graphene is a promising material for many potential applications, owing to its extraordinary properties. Numerous synthesizing approaches have been developed to realize the promising applications of graphene. However, there is lack of a comprehensive way, which combines the following features, i.e. large-area growth, patterned graphene and fast growth at the same time. Here, we provide an engineering approach to both large-area and patterned graphene at a high rate. The high power and continuous-wave lasers were employed to irradiate solid carbon source coated on nickel surface. The rate of graphene production by laser irradiation exceeds 28.8 cm2/min and the solid carbon source is less hazardous compared to typical gaseous carbon sources used in chemical vapor deposition (CVD). The influence of laser process on graphene fabrication was investigated systematically. Raman analyses, optical images and scanning electron microscopy (SEM) results show that the quality of graphene strongly depends on the laser ...

Direct Laser Fabrication of Large-Area and Patterned Graphene at Room Temperature

Direct Laser Fabrication of Large-Area Graphene: an Engineering Approach to Nano-Materials

Laser Direct Writing of Graphene Patterns

Laser Direct Writing of Graphene Nanostructures Beyond the Diffraction Limit by Graphene Oxidation

Laser Direct Writing Graphene Patterns on Sio2/Si Substrates

A Novel Preparation Method for Uniform Large-Area Graphene Films on Ni@Cu Substrate

Graphene synthesis by laser-assisted chemical vapor deposition on Ni plate and the effect of process parameters on uniform graphene growth

Direct Writing of Graphene Patterns on Insulating Substrates under Ambient Conditions.

Fast Growth Of Graphene Patterns By Laser Direct Writing

Layer-controlled and wafer-scale synthesis of uniform and high-quality graphene films on a polycrystalline nickel catalyst

Nanomanufacturing of Graphene Nanosheets Through Nano-Hole Opening and Closing

Production of extended single-layer graphene.

Femtosecond Laser Rapid Fabrication of Large-Area Rose-Like Micropatterns on Freestanding Flexible Graphene Films

Direct Patterning on Reduced Graphene Oxide Nanosheets Using Femtosecond Laser Pulses

Tunable Graphene Oxide Reduction and Graphene Patterning at Room Temperature on Arbitrary Substrates

Controlled Growth of Large-Area Monolayer Graphene on Ni (110) Facet: Insight from Molecular Dynamics Simulation

Laser-Guided, Self-Confined Graphitization for High-Conductivity Embedded Electronics

Structured Graphene Fabricated by Laser Direct Writing Beyond the Diffraction Limit

Fast Patterned Graphene Ribbons Via Soft–lithography

Direct growth of single-layer graphene on Ni surface manipulated by Si barrier

Relatively low temperature synthesis of graphene by radio frequency plasma enhanced chemical vapor deposition