Abstract:Trifluoroacetic acid-metal-organic deposition (TFA-MOD) is an effective method to prepare high-quality yttrium–barium–copper oxide (YBCO) superconducting thin films with a large area. Chemical reactions and purification are the keys to the preparation of the precursor solution in the TFA-MOD method. In this study, the process of preparing the precursor solution was examined by the infrared spectra systematically, and each infrared spectrum was determined by Fourier-transform-infrared spectroscopy (FTIR) to judge the possible side reactions. The results show that organic functional groups have no side effects at room temperature (20 ± 2°C). And the purification process can remove excess water, acid, and so on. The purity of the precursor solution would increase with distillation. When the relative height ratio of CF3− and the C−OH absorption peak in the spectra of solution 3, which has been purified three times, reaches 0.664, and the relative ratio of C−F and the C−OH absorption peak is 0.418, a YBCO thin film can be obtained with a perfectly uniform surface. Its transition-onset temperature is approximately 90.9 K, the value of critical current density (Jc) is 2.32 mA/cm2 (77 K, 0 T), and the growth of the superconducting film is strongly oriented to the c-axis. In addition, it was found that distillation removes excess water, acetic acid, and other small molecules, and determines the quality of YBCO thin films. For this performance, a superconducting film has been successfully applied to filter the fabrication. Therefore, this method is essentially an effective method to study the content of impurities in the precursor solution in order to form a superconducting film with good quality.The picture above is a summary of the article charts, divided into four major steps. In this study, the process of preparing the precursor solution was examined by infrared spectra systematically, and each infrared spectrum was determined by Fourier transform infrared spectroscopy (FTIR) to judge possible side reactions. And the microstructure and superconductivity of thin film have been characterized by XRD, SEM, CRYO SCAN equipment and four-probe method. Finally, this performance of superconducting film haves been successfully applied to the filter fabrication through this research method.

Purification of yttrium to 4N5+ purity

Purification of praseodymium to 4N5+ purity

Research on the Removal of Impurity Elements During Ultra-High Purification Process of Terbium

Purification of Ytterbium from Heavy Rare Earth Sulphate Solution by Electrolysis Reduction

Separation and purification of Yb2O3 by ion exchange chromatography and preparation of ultra-high purity Yb2O3

Preparation of High Purity Rare Earth Metals of Samarium, Ytterbium and Thulium

Separation behavior of trace impurities during deep purification of zone-fused germanium tailings via vacuum distillation

Technical research on vacuum distillation to purify magnesium to 99.99% purity

Behavior of Impurity Elements in Pure Gadolinium During Ultra-High Purification

Impurity Distribution in Distillate of Terbium Metal During Vacuum Distillation Purification

Preparation of high-purity tantalum ethoxide by vacuum distillation

Distribution Model of Lowly Volatile Impurity in Rare Earth Metal Purified by Vacuum Distillation

A Study on the Removal of Impurity Elements Silicon and Zinc from Rubidium Chloride by Vacuum Distillation

One-step preparation of high purity magnesium by vacuum distillation technology

A clean and short process for the preparation of refined indium and investigation of migration distribution pattern of impurities thallium and tin via vacuum distillation

The Influence of Yttrium Content and Ceramic Crucible Materials on Desulfurization during Vacuum Induction Melting of DD5 Superalloys

Preparation of High-Purity Magnesium from Electrolytically Produced Crude Magnesium via Vacuum Distillation

Thermodynamic Data of Separating Yttrium from Heavy Rare Earths via a Phenoxypropionate-Based Ionic Liquid

Study of precursor-solution purity for high-quality yttrium–barium–copper-oxide superconducting thin film

The Separation Behavior of Impurities in the Purification of High-Purity Magnesium via Vacuum Distillation

Hydrogen In-Situ Refining Method for Preparing High Purity Gadolinium