Abstract:This paper proposes a straightforward model that can describe the arsenic(As) impurity behavior during the vacuum volatilization purification process of antimony (Sb) metal. This model aims to determine the optimal degree of volatilization and predict As impurity concentration in the purified Sb metal. Vacuum volatilization experiments were conducted to verify this model at the volatilization temperatures of 700 °C, 730 °C, and 760 °C. The research results indicated that, the concentrations of As impurity in both residue and volatile exhibit an exponentially decreasing trend throughout the entire volatilization process; the decrease in the condensing temperature at the different locations of volatiles leads to an increase in As impurity concentration, which is accompanied by the variations in crystal morphology; there is a good agreement between the calculated and experimental results in the residues, which the mean standard deviations are ± 0.025, ±0.094, and ± 0.148 respectively at the above volatilization temperatures; the calculated results are much higher than the experimental results in the volatiles due to the calculated separation coefficient without the consideration of kinetic factor; the optimal volatilization degrees of 36.50 %, 35.95 %, and 38.44 % respectively result in volatilization removal rates and residual rates both exceeding 60 %; Upon the volatilization degrees are equal to 36.94 %, 30.28 %, and 47.09 %, As impurity decreases from the initial concentrations of 27.82 mg/kg, 22.90 mg/kg, and 35.08 mg/kg to the ultimate concentrations of 10 mg/kg respectively, which meets the purity standard of 4.5 N (99.995 %). Consequently, this model can quantitatively predict As impurity concentration in the purified Sb metal, which provides the theoretical guidance for the As removal from Sb metal by vacuum volatilization.

Distribution Model of Lowly Volatile Impurity in Rare Earth Metal Purified by Vacuum Distillation

Impurity Distribution in Distillate of Terbium Metal During Vacuum Distillation Purification

The separation behavior of impurity in antimony during vacuum distillation

A novel model of bismuth and lead impurities removal behavior in purification of antimony metal by vacuum distillation

Research on the Removal of Impurity Elements During Ultra-High Purification Process of Terbium

Aggregated Model High Purity Distillation Column Based on Group Methods

A Grey Model and Prediction of the Vacuum Distilled Furnace for Separating Sn-Pb Alloy

MODELING OF BATCH DISTILLATION STARTING FROM COLD STATE

A clean and short process for the preparation of refined indium and investigation of migration distribution pattern of impurities thallium and tin via vacuum distillation

Impurity Characterization by LA-ICP-MS in Terbium Metal after Solid State Electrotransport Purification

Technical research on vacuum distillation to purify magnesium to 99.99% purity

Research on Interstitial Impurity Purification Progress in Rare Earth Metals

Purification of yttrium to 4N5+ purity

A Study on the Removal of Impurity Elements Silicon and Zinc from Rubidium Chloride by Vacuum Distillation

Vacuum separation of zinc-silver alloy: Measurement and modeling of vapor-liquid equilibrium

Innovative vacuum distillation technology for preparing refined Al from Al–Mg alloy

Impurity distribution in preparation of high-purity aluminum by vacuum zone melting

Preparation of High Purity Rare Earth Metals of Samarium, Ytterbium and Thulium

Exploring arsenic removal behavior in purification process of antimony metal through vacuum volatilization

Volatilization behavior of impurities in molybdenum concentrate through vacuum distillation

Aggregate Models Based On The Wave Propagation Theory For High-Purity Distillation Columns