Abstract:To reduce significantly the leakage of 4,4',(5')-di-(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6), an improved silica-based polymeric composite, (DtBuCH18C6+TBP)/SiO2-P, was prepared. It was done by impregnating and immobilizing DtBuCH18C6 and tri-n-butyl phosphate (TBP) molecules into the pores of SiO2-P particles through an advanced vacuum sucking technique. The adsorption of 10 typically simulated elements, Ru(III), Pd(II), Ba(II), Mo(VI), La(III), Y(III), Na(I), K(I), Sr(II), and Cs(I), toward (DtBuCH18C6+TBP)/SiO2-P was investigated in the HNO3 concentration range of 0.1-5.0 M. In optimum 2.0 M HNO3 solution, (DtBuCH18C6+TBP)/SiO2-P showed strong adsorption ability and high selectivity for Sr(II) over all of the tested elements. The quantity of total organic carbon (TOC), 281.8 ppm, leaked from (DtBuCH18C6+TBP)/SiO2-P was much lower than that of 532.3 ppm leaked from DtBuCH18C6/SiO2-P. A significant reduction of DtBuCH18C6 leakage was achieved. In terms of the batch experiments, the chromatographic separation of Sr(II) from a 2.0 M HNO3 solution was performed by a (DtBuCH18C6+TBP)/SiO2-P packed column. Na(I), K(I), Cs(I), Pd(II), Mo(VI), La(III), Ru(III), and Y(III) were found to elute facilely and flow into the effluent along with 2.0 M HNO3 because of the weak or no adsorption. Sr(II) and Ba(II) adsorbed strongly and were desorbed sufficiently by distilled water and then separated completely from the others. The recovery percentage was 100.5% for Sr(II) and in the range 99.2-100.6% for the others. The application of the macroporous silica-based (DtBuCH18C6+TBP)/SiO2-P polymeric composite in partitioning of Sr(II) from high level liquid waste (HLLW) is promising.

Impurity Distribution in Distillate of Terbium Metal During Vacuum Distillation Purification

Distribution Model of Lowly Volatile Impurity in Rare Earth Metal Purified by Vacuum Distillation

Research on the Removal of Impurity Elements During Ultra-High Purification Process of Terbium

The separation behavior of impurity in antimony during vacuum distillation

Impurity Characterization by LA-ICP-MS in Terbium Metal after Solid State Electrotransport Purification

Purification of Terbium by Means of Argon and Hydrogen Plasma Arc Melting

Preparation of A Novel Silica-Based Dtbuch18c6 Impregnated Polymeric Composite Modified by Tri-N-Butyl Phosphate and Its Application in Chromatographic Partitioning of Strontium from High Level Liquid Waste

A novel model of bismuth and lead impurities removal behavior in purification of antimony metal by vacuum distillation

Purification of yttrium to 4N5+ purity

A clean and short process for the preparation of refined indium and investigation of migration distribution pattern of impurities thallium and tin via vacuum distillation

Preparation of high-purity tantalum ethoxide by vacuum distillation

Removal of Gaseous Impurities from Terbium by Hydrogen Plasma Arc Melting

Volatilization behavior of impurities in molybdenum concentrate through vacuum distillation

Impurity distribution in preparation of high-purity aluminum by vacuum zone melting

Characteristics of Nb and Ta in V–Cu Residue from the Purification Process of TiCl4

Tungsten separation behavior on preparation of high-purity cerium by combined vacuum gravity sedimentation–directional solidification

A Study on the Removal of Impurity Elements Silicon and Zinc from Rubidium Chloride by Vacuum Distillation

The Separation Behavior of TiB2 during Cl2-Free Degassing Treatment of 5083 Aluminum Melt

Removal of chloride impurities from titanium sponge by vacuum distillation

Exploration for Oxygen Diffusion During Deoxidation Process of Terbium with 18O As Isotope Tracer

Exploration for oxygen diffusion during deoxidation process of terbium with 18 O as isotope tracer