Abstract:A facile strategy was developed to prepare Li5Cr7Ti6O25@CeO2 composites as a high-performance anode material. X-ray diffraction (XRD) and Rietveld refinement results show that the CeO2 coating does not alter the structure of Li5Cr7Ti6O25 but increases the lattice parameter. Scanning electron microscopy (SEM) indicates that all samples have similar morphologies with a homogeneous particle distribution in the range of 100-500 nm. Energy-dispersive spectroscopy (EDS) mapping and high-resolution transmission electron microscopy (HRTEM) prove that CeO2 layer successfully formed a coating layer on a surface of Li5Cr7Ti6O25 particles and supplied a good conductive connection between the Li5Cr7Ti6O25 particles. The electrochemical characterization reveals that Li5Cr7Ti6O25@CeO2 (3 wt %) electrode shows the highest reversibility of the insertion and deinsertion behavior of Li ion, the smallest electrochemical polarization, the best lithium-ion mobility among all electrodes, and a better electrochemical activity than the pristine one. Therefore, Li5Cr7Ti6O25@CeO2 (3 wt %) electrode indicates the highest delithiation and lithiation capacities at each rate. At 5 C charge-discharge rate, the pristine Li5Cr7Ti6O25 only delivers an initial delithiation capacity of similar to 94.7 mAh g(-1), and the delithiation capacity merely achieves 87.4 mAh g(-1) even after 100 cycles. However, Li5Cr7Ti6O25@CeO2 (3 wt %) delivers an initial delithiation capacity of 107.5 mAh.g(-1), and the delithiation capacity also reaches 100.5 mAh g(-1) even after 100 cycles. The cerium dioxide modification is a direct and efficient approach to improve the delithiation and lithiation capacities and cycle property of Li5Cr7Ti6O25 at large current densities.

Investigation of Cr2O3as Anode Materials for Lithium-Ion Batteries by Electrochemical Impedance Spectroscopy

Investigation Of Lithiation Mechanism Of Licr3o8 As Potential Anode Materials For Lithium-Ion Batteries

Electrochemical Impedance Spectroscopy of Cr-doping Spinel LiCr_xMn_(2-x)O_4 Cathode Material

CrPO4/C Composite As a Novel Anode Material for Lithium-Ion Batteries

Electrochemical Impedance Analysis of Electrodeposited Si–O–C Composite Thick Film on Cu Microcones-Arrayed Current Collector for Lithium Ion Battery Anode

Synthesis and Characterization of Alpha-Fe2o3/C Composite Anode for Lithium Ion Batteries

Investigation of Electronic and Ionic Transport Properties in Α-Moo3 Cathode Material by Electrochemical Impedance Spectroscopy

Electrochemical Performance of CrOx Cathode Material for High Energy Density Lithium Batteries

Investigation of the Lithiation Mechanism of Fe3O4‐Based Composite Anode: the Effect of the Carbon Matrix

Electrochemical Impedance Spectroscopy Illuminating Performance Evolution of Porous Core–Shell Structured Nickel/Nickel Oxide Anode Materials

Electrochemical Impedance Spectroscopy Investigation of the FeF3/C Cathode for Lithium-Ion Batteries

Robust Strategy for Crafting Li5cr7ti6o25@Ceo2 Composites As High-Performance Anode Material for Lithium-Ion Battery

Co-Precipitation Synthesis and Electrochemical Properties of Crnbo4 Anode Materials for Lithium-Ion Batteries

Investigation of the Cathode–Catalyst–Electrolyte Interface in Aprotic Li–O2 Batteries

Preparation of Cr-doped LiVPO4F and Electrochemical Studies on Li Extraction/Insertion Performances for Lithium-ion Batteries

In-situ study of mechano-electrochemical coupling properties of symmetrical SnO 2 /Gr electrodes for lithium-ion batteries using digital image correlation

Electrochemical Impedance Spectroscopy (eis) Study of Lini1/3co1/3mn1/3o2 for Li-Ion Batteries

Probing Reversible Multielectron Transfer and Structure Evolution of Li1.2Cr0.4Mn0.4O2 Cathode Material for Li-Ion Batteries in a Voltage Range of 1.0–4.8 V

Investigation of Layered LiNi1/3Co1/3Mn1/3O2 Cathode of Lithium Ion Battery by Electrochemical Impedance Spectroscopy

Effects of Pluronic P123 addition and Cr3+ doping on electrochemical properties of Li4Ti5O12 anode for lithium ion batteries

Exploration of Cr0.2Fe0.8Nb11O29 As an Advanced Anode Material for Lithium-Ion Batteries of Electric Vehicles