Abstract:Increasing demand of sustainable energy utilization boosts the development of high performance energy storage technologies in particular lithium-ion batteries [1]. Transition metal oxides have attracted tremendous attention as promising electrode materials for lithium-ion batteries due to their abilities to deliver much higher specific capacities at a relatively inexpensive cost [2]. For structural considerations, it is widely acknowledged that the ideal layered or spinel structures are crucial for reversible lithium insertion and extraction as they can provide space for efficient ionic transportation while maintain good stability of oxygen-metal frameworks [3]. It is also well known for many metal oxides that phase conversion reactions can occur upon a deep lithium insertion, which will increase the overall battery capacity along with severe structure modifications such as collapsing single-crystalline particles into small nanoparticle composites [1, 2]. Specifically for spinel iron oxide (Fe3O4 or magnetite), multiple phase transformation along with structure changes have been previously found by static characterizations after complete relaxation from electrochemical reactions [4, 5]. However, real batteries do not operate under true equilibrium conditions, which may make actual phase transitions carry out in different and complicated ways. Thus, it is of great importance to understand the structural evolution throughout a full lithiation process so as to precisely regulate the lithiated phases with desired structures for future design and applications of these electrode materials. For such purposes, we need to utilize in situ transmission electron microscopy (TEM) and spectroscopy [6], which have sufficient spatial resolution and chemical detectability to obtain direct correlations between microstructure and electrochemistry. In this work, we implement the in situ dry-cell setup for real-time observation of electrochemical lithiation inside a TEM (JEOL 2100F operated at 200 kV), where the composite electrode containing Fe3O4 nanocrystals and the amorphous carbon support will be lithiated, while extra side reactions are eliminated with no participation of liquid electrolyte [6]. Using a strain-sensitive scanning transmission electron microscopy (STEM) approach, we were able to observe the phase changes within a single Fe3O4 nanocrystal, and clearly differentiate two reaction steps: 1) lithium intercalation with structural change from spinel to rocksalt by displacing the Fe cations from tetragonal 8a sites to the nearby octahedral 16c sites; and 2) the subsequent conversion to form composites of ultrafine Fe nanoparticles along with amorphous Li2O. With real-time observation, we found that these two steps are largely overlapped due to the kinetic effects under nonequilibrium electrochemical conditions. The results are consistent with synchrotron x-ray diffraction and well explained by calculations using both first-principle DFT and phase-field theory. Our findings provide insights into understanding lithiation mechanisms in spinel structures, and also show implications for improving performance in future design of battery electrodes. References: [1] J. M. Tarascon and M. Armand, Nature 414, 359 (2001). [2] J. Cabana, et al. Adv. Mater. 22, E170 (2010). [3] M. M. Thackeray, J. Electrochem. Soc. 142, 2558 (1995). [4] M. M. Thackeray, J. Power Sources 21, 1 (1987). [5] J. Fontcuberta, et al. J. Appl. Phys. 59, 1918 (1986). [6] K. He, et al. Nano Lett. 15, 1437 (2015).

Rate-dependent Electrochemical Reaction Mechanism of Spinel Metal Oxide Anode Studied by in Situ TEM

Boosting the Electrochemical Performance of a Spinel Cathode with the In Situ Transformed Allogenic Li-Rich Layered Phase

Improving the Electrochemical Performance of a Lithium-Rich Layered Cathode with an In Situ Transformed Layered@Spinel@Spinel Heterostructure

Cobalt Doped Spinel LiMn2O4 Cathode Toward High-Rate Performance Lithium-Ion Batteries

Unlocking the Origins of Highly Reversible Lithium Storage and Stable Cycling in a Spinel High‐Entropy Oxide Anode for Lithium‐Ion Batteries

A real time study of the coupled electrochemical and mechanical behaviors of the spinel cathodes in LIBs

Structural Evolution of Spinel Iron Oxide During Nonequilibrium Lithiation

Improved Electrochemical Performance of Li-Rich Cathode Materials Via Spinel Li<sub>2</sub>MoO<sub>4</sub> Coating

Improved Electrochemical Performance of Li-Rich Cathode Materials via Spinel Li2MoO4 Coating

Spinel (Ni0.4Co0.4Mn0.2)3O4 nanoparticles as conversion-type anodes for Li- and Na-ion batteries

Spinel-Structured, Multi-Component Transition Metal Oxide (Ni,Co,Mn)Fe2O4−x as Long-Life Lithium-Ion Battery Anode Material

Nanostructure-Mediated Phase Evolution in Lithiation/Delithiation of Co3O4.

Influence of Transition-Metal Order of LNMO Spinel on the Li Ion Diffusion

Revealing the Conversion Mechanism of Transition Metal Oxide Electrodes During Lithiation from First-Principles

Atomic-resolution In-Situ TEM Studies of Lithium Electrochemistry in Co3O4-Carbon Nanotube Nanocomposite

Effect of Metal Cation Selection on Phase Properties and Electrochemical Performance of Co-Free High Entropy Spinel Oxide Anodes

Spinel/Layered Heterostructured Lithium-Rich Oxide Nanowires as Cathode Material for High-Energy Lithium-Ion Batteries

Insight into the cation migration and surface structural evolution of spinel LiNi0.5Mn1.5O4 cathode material for lithium-ion batteries

Tailorable Electrochemical Performance of Spinel Cathode Materials Via In-Situ Integrating a Layered Li2MnO3 Phase for Lithium-Ion Batteries

Capacity Fade of Li[sub 1+x]mn[sub 2−x]o[sub 4]-Based Lithium-Ion Cells

Li+ and PO43– Codoping Synergy to Enhance the Cycling Stability and Rate Capacity of Spinel LiMn2O4 Cathode for Lithium-Ion Batteries