Abstract:Silica (SiO2) is considered as a promising candidate anode material for next-generation lithium-ion batteries (LIBs) owing to its low cost, abundant reserve on Earth, and relatively high theoretical specific capacity. However, the development of SiO2-based anode materials has been impeded by their poor electrical conductivity and sluggish charge-transfer kinetics. Herein, porous SiO2/tin (SiO2@Sn) composites with tunable SiO2 to Sn molar ratios are fabricated using a scalable, simple, and low-cost ball-milling and low-temperature thermal-melting combined method. It is found that the Sn phase can significantly improve the diffusion and migration kinetics of Li in the composites, whereas the SiO2 to Sn molar ratio plays a key role in the mechanical integrity and subsequent cycling behaviors of the composite electrodes. By optimizing the molar ratio of SiO2/Sn to 10:1, the synergistic effect of Li storage between SiO2 and Sn can lead to the simultaneous achievement of improved Li kinetics and ensured mechanical integrity, contributing to the excellent electrochemical performance of the composite with a large reversible capacity of 613 mAh g–1 at 100 mA g–1, a remarkable rate capability of 450 mAh g–1 retained at 1000 mA g–1, and long-term cycling durability with ∼95% capacity retention over 200 cycles.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00023?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00023</a>.SEM image; CV curves; XPS spectra; cycling and rate performance of different samples; and description of chemo-mechanical simulation (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00023/suppl_file/ae1c00023_si_001.pdf">PDF</a>)Chemo-mechanical simulation of Li and effective stress evolutions in the blocks and on the cross sections of SiO2@Sn-10 and SiO2@Sn-1 electrodes (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00023/suppl_file/ae1c00023_si_002.avi">AVI</a>)This article has not yet been cited by other publications.

In-situ study of mechano-electrochemical coupling properties of symmetrical SnO 2 /Gr electrodes for lithium-ion batteries using digital image correlation

JES FOCUS ISSUE ON MECHANO-ELECTRO-CHEMICAL COUPLING IN ENERGY RELATED MATERIALS AND DEVICES Structural Evolution and Pulverization of Tin Nanoparticles during Lithiation-Delithiation Cycling

First-principles study on the synergistic mechanism of SnO2 and graphene as a lithium ion battery anode

First-principles study on the synergistic mechanism of SnO 2 and 2 graphene as a lithium ion battery anode 3

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

Synthesis of SnO2versus Sn Crystals Within N-doped Porous Carbon Nanofibers Via Electrospinning Towards High-Performance Lithium Ion Batteries

Synergistic Lithium Storage in Silica–Tin Composites Enables a Cycle-Stable and High-Capacity Anode for Lithium-Ion Batteries

Electrochemical Performance of SnO_2-Si/C Composite for Anode Materials of Lithium-Ion Battery

Preparation and Electrochemical Characterization of Tin/graphite/silver Composite As Anode Materials for Lithium-Ion Batteries

Synthesis of SnO2/Sn@carbon Nanospheres Dispersed in the Interspaces of a Three-Dimensional SnO2/Sn@carbon Nanowires Network, and Their Application As an Anode Material for Lithium-Ion Batteries

Toward a fundamental understanding of the heterogeneous multiphysics behaviors of silicon monoxide/graphite composite anodes

Hydrothermal Synthesis of SnO2 Embedded MoO3-x Nanocomposites and Their Synergistic Effects on Lithium Storage

Atomistic uncovering Li+ diffusion behaviors in SnO2-Graphene hybrids

Uniform integration of amorphous SnO2 nanoparticles encapsulated into the carbon matrix as enhanced electrochemical performance anodes for lithium-ion batteries

In Situ Synthesis of SnO2nanoparticles Encapsulated in Micro/mesoporous Carbon Foam As a High-Performance Anode Material for Lithium Ion Batteries

The mechanistic exploration of porous activated graphene sheets-anchored SnO2 nanocrystals for application in high-performance Li-ion battery anodes.

In Situ Electrode Stress Monitoring: An Effective Approach to Study the Electrochemical Behavior of a Lithium Metal Anode

In-situ Mechanochemical Synthesis of Sub-Micro Si/Sn@SiOx-C Composite As High-Rate Anode Material for Lithium-Ion Batteries

Fabrication and Electrochemical Properties of SnO2/Ni Composite Anodes for Lithium Ion Batteries

Mesoporous SnO 2@carbon coreshell nanostructures with superior electrochemical performance for lithium ion batteries

Synthesis and Electrochemical Properties of Ultrafine Sn and SnO2 Dispersed Carbon Matrix Composite Anode Materials for Li-ion Batteries