Abstract:Electrochemical reactions occur at the electrode/electrolyte interface. In lithium-ion batteries, the reversible Li ion insertion/desertion from the interfaces of electrodes gives the capacity of the battery. The surface phase transition and component chemical states change during the lithiation/delithiation in turn hugely effect the further battery capacity and reversibility. In the past decades, many ex-situ characterizations gave some insights of electrode surface behavior after cycling. However, the surface chemistry of electrode relies decisively on the real battery operation condition, e.g. the passive layer formed on the electrode surface changes dramatically with the absence of electrolyte. Therefore it is emerging and necessary to develop operando study for electrode/electrolyte interface probing during battery cycling. X-ray photoelectron spectroscopy (XPS) as a surface sensitive technique detects the photoelectrons ejected from core level with certain pass energy. The binding energy of the electrons give the information of chemical composition and chemical states of the materials. Ambient pressure XPS, developed rapidly in recent years after since it gives possibility of the participation of gas and/ liquid phase, enabling the observation of structure dynamics during chemical reactions, thereby unprecedentedly extended the application of the technique. A method called dip-and-pull is used for operando liquid/solid interface probing. With a typical three-electrode system, the electrode is pulled up from the electrolyte with still contact to liquid to maintain the circuit. A thin film of electrolyte formed with a shape of meniscus at the interface of electrode, electrolyte and atmosphere is probed through. The probing of the electrochemical active surface through the liquid can be achieved with an optimized liquid layer and surface condition. In this study Lithium cobalt oxide (LCO), as the most widely used positive electrode for Li-ion battery with rock salt layered structure optimized for reversible Li intercalation/deintercalation, is used for interface dynamics investigation. As Li is deintercalated from LCO structure, the charge transfer from Li + to Co-O environment causes a phase change. It was commonly assumed that the charge due to the deintercalation of Li from structure is fully transferred to Co 3+ , i.e. the loss of one electron contributes to one Co 4+ from Co 3+ oxidation. However, it is recently reported that the real condition maybe more complicated. The charge transfer from Li + to O a- (a<2) might take place especially during high voltage due to the hybrid fermi level of O and Co which might increase the mobility of O a- and further results in cobalt reduction and oxygen evolution reaction. But the mechanism of structure evolution under corresponding potentials are very unclear. In this study, with the operando probing with APXPS, it is discovered that a native phase of Co 2+ may play an unignorable role in the charge transfer, giving some new understandings of phase transition during lithiation/delithiation (see figure 1). With the development of APXPS for battery probing, combining with software data treatment, a clearer picture of phase evolution is possible to be given by time-resolved probing with APXPS. Potentially hidden intermediate states during electrochemical reactions which cannot be given from ex-situ probing are resolved. Figure 1

Investigation of the Cathode–Catalyst–Electrolyte Interface in Aprotic Li–O2 Batteries

Enhanced Cycling Performance of Li–O2 Battery by Using a Li3PO4-Protected Lithium Anode in DMSO-Based Electrolyte

Investigation of Solid Electrolyte Interface Formation in Li3as Electrode Material in a Solid-State Battery Configuration

In Situ Spectroscopic Probing of Oxygen Crossover Effects on Solid Electrolyte Interphase in Aprotic Lithium‐Oxygen Batteries

Double-Phase Electrolyte Enabling the Long-Lasting Redox Mediation in Li–O2 Batteries

Electrode/electrolyte Interface in the Li-O2 Battery: Insight from Molecular Dynamics Study

Compatible interface design of CoO-based Li-O2 battery cathodes with long-cycling stability

Investigating the Cyclability and Stability at the Interfaces of Composite Solid Electrolytes in Li Metal Batteries

On the Formation of a Cathode Electrolyte Interphase on High Voltage Li-ion Cathodes

Interfacial Effects On Lithium Superoxide Disproportionation In Li-O-2 Batteries

Unravelling the Chemistry and Microstructure Evolution of a Cathodic Interface in Sulfide-Based All-Solid-State Li-Ion Batteries

Probing Surface Dynamics of SiOx Thin-Film Electrodes during Cycling through X-Ray Photoemission Spectroscopy and Operando X-Ray Reflectivity

D‐Band Center Regulation for Durable Catalysts and Constructing a Robust Hybrid Layer on Li Anode Enable Long‐Life Li‐O2 Batteries

An Ultra-Stable and Enhanced Reversibility Lithium Metal Anode with a Sufficient O2 Design for Li-O2 Battery

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

Decoupling mass transport and electron transfer by a double-cathode structure of a Li-O<sub>2</sub> battery with high cyclic stability

Operando Ambient Pressure X Ray Photoelectron Spectroscopy for Li-Ion Battery Electrode/Electrolyte Interface Probing

A New Design Strategy for Observing Lithium Oxide Growth-Evolution Interactions Using Geometric Catalyst Positioning

On the Reversibility of Noble Metal-Catalyzed Aprotic Li-O2 Batteries.

Chemo-mechanical stable cathode interphase via interface in-situ catalytic-conversion integrated design for all solid-state batteries

In Situ Characterization of Interface Evolution in Argyrodite-Based All-Solid-State Li Batteries