Abstract:The first-generation semiconductor materials represented by silicon (Si) and germanium (Ge) still hold a dominant position in many fields, including micro-electromechanical systems (MEMS) and integrated circuits (ICs). The processing of these materials continues to attract significant research attention for improvements in quality and efficiency. This study proposes a novel hybrid laser-enhanced particle-laden electrochemical machining (LEPL-ECM) process, whereby pulsed laser irradiation is utilized to selectively and locally enhance the electrical conductivity of Ge at specific locations. A neutral electrolyte jet, containing abrasive diamond particles, is applied to the location on the wafer surface opposite the laser irradiation, facilitating a localized and enhanced electrochemical dissolution. The effect of micro-particle erosion effectively removes the generated oxides and potential passivation layers, ensuring continuous and efficient electrochemical reactions. Consequently, high-quality micro-dimples with an entrance diameter of about 380-800 μm, a depth of around 138-300 μm, and a quasi-mirror surface with the roughness (Sa) of as low as 59.8 nm can be achieved within 90 seconds. Furthermore, the effects of the applied voltage, laser power and processing time on the resulting dimple characteristics and surface quality are discussed, along with a detailed morphology characterization. Dense micro-pits, radial streamlined micro-grooves and a special transitional region have been observed on dimple center, sidewall and near the edge, respectively, and the formation mechanism have been analyzed. Finally, a simulation of the electrolyte jet induced fluid pressure and velocity as well as the particle trajectory and distributions within and surrounding the dimple structure was conducted, which reveals that the synergistic mechanism associated with the hybrid material removal process involves both electrochemical corrosion and abrasive erosion.

Debris-Free Rear-Side Picosecond Laser Ablation of Thin Germanium Wafers in Water with Ethanol

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Dry Etching of Germanium with Laser Induced Reactive Micro Plasma

Mechanisms and characterization of a novel hybrid laser-enhanced particle laden electrochemical fabrication process for high quality micro-dimples on germanium wafers

Sub-damage-threshold plasma etching and profile tailoring of Si through laser-stimulated thermal desorption

Super stealth dicing of transparent solids with nanometric precision

Alcohol-Assisted Photoetching of Silicon Carbide with A Femtosecond Laser

Influence of liquid environments on femtosecond laser ablation of silicon

Germanium Sub-Microspheres Synthesized by Picosecond Pulsed Laser Melting in Liquids: Educt Size Effects

Nanosecond laser ablation of Si(111) under an aqueous medium

High quality full ablation cutting and stealth dicing of silica glass using picosecond laser Bessel beam with burst mode

Picosecond Laser Ablation of Millimeter-Wave Subwavelength Structures on Alumina and Sapphire

Localized and efficient machining of germanium based on the auto-coupling between picosecond laser irradiation and electrochemical dissolution: Mechanism validation and surface characterization

Efficiency studies of particle removal with pulsed-laser induced plasma

Laser-induced microjet-assisted ablation for high-quality microfabrication

Picosecond laser ablation of high-quality micro-grooves on CIGS (CuIn(1-x)Ga2Sex) thin films

Multi-pulse LIBDE of Fused Silica at Different Thicknesses of the Organic Absorber Layer

Laser-Induced Cavitation-Assisted True 3D Nano-Sculpturing of Hard Materials

Creating extreme subsurface integrity by laser-induced material self-organization

Etching Process of 980 Nm Tapered Semiconductor Laser

Selective Delamination upon Femtosecond Laser Ablation of Ceramic Surfaces