Abstract:The Li+ adsorption from aqueous solution by lithium-ion sieve has become one of the most promising methods due to the high efficiency and selectivity towards lithium ion (Li+). However, the industrial application of manganese oxide ion-sieve is limited due to its difficult separation and decrease of adsorption capacity resulting from manganese dissolution loss. In this paper, the magnetically recyclable Fe-doped manganese oxide lithium ion-sieves with spinel-structure were proposed and prepared from LiMn2-xFexO4 synthesized by solid state reaction method. The effects of calcination temperature, calcination time and Fe doping amounts on the phase compositions, dissolution loss and adsorption performance of lithium ion-sieve precursors were systematically studied, and the influences of solution pH value, initial Li+ concentration and adsorption temperature on the adsorption performance were investigated. The adsorption mechanism was further discovered through adsorption kinetics and thermodynamics. The results show that the adsorption capacity of lithium ion-sieves could reach to 34.8 mg.g(-1) when the calcination temperature, time and Fe doping content were controlled at 450 degrees C, 6 h, and 0.05, respectively. The Mn dissolution loss was reduced to 0.51%, much lower than the undoped lithium ion-sieve (2.48%), which is attributed to the inhibition of disproportionation reaction with the increasing proportion of Mn4+ in the skeleton. The adsorption process conformed to the pseudo-second-order kinetics equation and Langmuir isothermal adsorption model. Furthermore, the recycling performance of Fe-doped lithium ion-sieve showed that the adsorption capacity could remain 22.5 mg.g(-1) (about 70%) after five cycles, which is greater than that of undoped lithium ion-sieve (about 50%), and the recovery of lithium ion-sieve can be realized by magnetic separation in an applying magnetic field. (C) 2021 The Author(s). Published by Elsevier B.V.

Surface modification of spinel λ-MnO 2 and its lithium adsorption properties from spent lithium ion batteries

Surface Modification and Electrochemical Properties of Li-Rich Layered Cathode Materials for Lithium-Ion Batteries

Practical synthesis of manganese oxide MnO2·0.5H2O for an advanced and applicable lithium ion-sieve

Island-like CeO2 decorated LiMn2O4: Surface modification enhancing electrochemical lithium extraction and cycle performance

Lithium Selective Adsorption on 1-D MnO2 Nanostructure Ion-Sieve

Electrochemical Characterization of Surface-Modified LiMn 2 O 4 Cathode Materials for Li-ion Batteries

Surface Modification and Characterization of Spinel LiMn2O4 Coated with MgO

Surface Modification Mechanism of Spinel Structure LiM_xMn_(2-x)O_4 As Cathode Materials for Lithium Ion Batteries

LIMN2O4 SPINEL DIRECT SYNTHESIS AND LITHIUM ION SELECTIVE ADSORPTION

Preparation and Li + extraction/adsorption properties of lithium-rich manganese oxide in aqueous solution

Surface Modification of Spinel Limn2o4 with Y2o3 for Lithium-Ion Battery

MnO2 ion-sieve for lithium adsorption from aqueous resources

Enhanced Li<SUP>+</SUP> adsorption by magnetically recyclable iron-doped lithium manganese oxide ion-sieve: Synthesis, characterization, adsorption kinetics and isotherm

Progress of Research on the Manganese Oxide Ion-Sieve for Extracting Lithium

Beneficial impact of incorporating spinel lithium manganate and samarium oxide into high performance positive materials through ultrasonic cavitation strategy

Surface Modification of Li1.03mn1.97o4 Spinels for Improved Capacity Retention

Nanostructure Ion-Sieves for Lithium Adsorption

Can surface modification be more effective to enhance the electrochemical performance of lithium rich materials?

Preparation and adsorption property of spinel-type lithium ion-sieve

Synthesis, Characterization And Property Of Nanooxide Lithium Ion-Sieve

Enhanced High Power and Long Life Performance of Spinel LiMn2O4 with Li2MnO3 Coating for Lithium-Ion Batteries