Abstract:High power application of Li battery remains a challenge due to the lack of suitable cathode materials that are stable at high current rates. Lithium manganese oxide (LiMn2O4 or LMO) spinel cathode is very promising due to its high operating voltage as well as fast charging ability, however, the associated Mn dissolution is one of the main hindrances to its practical applicability. In this work, we report a commercially scalable method (from 100 g to a few hundred kilograms of material) to develop novel lithium manganese oxide (LMO) electrode material with a unique multilayered morphology. This novel material (named CXL LMO) was tested in a Li metal cell where a reversible specific capacity of 110 mAh/g was achieved with 99% retention after 100 cycles. It showed excellent rate performance up to 20C current rate which is equivalent to 20 mA/cm2 current density. A Li-ion cell (CXL LMO|Graphite) was also reported with a practical areal capacity of 1 mAh/cm2 and showed stable behavior for more than 500 cycles. Cross-section morphology revealed the multi-layered structure was retained at the core of the novel LMO material and the structural integrity was maintained during cycling without any morphological degradation at a high rate and obtained lesser Mn dissolution compared to commercial LMO. The scalable synthesis procedure, high current rate stability, high cathode areal loading, and superior capacity retention make CXL LMO a promising candidate for high-power Li batteries.

Beneficial impact of incorporating spinel lithium manganate and samarium oxide into high performance positive materials through ultrasonic cavitation strategy

Boosting the cycling performance of spinel LiMn2O4 by in situ MnBO3 coating

Research Development on Spinel Lithium Manganese Oxides Cathode Materials for Lithium-Ion Batteries

Overlithiation-driven structural regulation of lithium nickel manganese oxide for high-performance battery cathode

Improved Electrochemical Performance of Li-Rich Cathode Materials via Spinel Li2MoO4 Coating

Improved electrochemical performance of spinel LiMn2O4 derived from manganese-based metal organic frameworks by organic ligands

A high-performing spinel LiMn2O4 cathode material with unique morphology and scaled manufacture

Controllable Growth of LiMn2O4 by Carbohydrate-Assisted Combustion Synthesis for High Performance Li-ion Batteries

Tackling The Interfacial Issues Of Spinel Lini0.5mn1.5o4 By Roomtemperature Spontaneous Dediazonation Reaction

Bulk and surface reconstructed Li-rich Mn-based cathode material for lithium ion batteries with eliminating irreversible capacity loss

An Li-rich oxide cathode material with mosaic spinel grain and a surface coating for high performance Li-ion batteries

Positive active materials of lithium manganese oxides for lithium-ion batteries

Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries

Insight into the cation migration and surface structural evolution of spinel LiNi0.5Mn1.5O4 cathode material for lithium-ion batteries

Unraveling the Mechanism and Practical Implications of the Sol-Gel Synthesis of Spinel LiMn2O4 as a Cathode Material for Li-Ion Batteries: Critical Effects of Cation Distribution at the Matrix Level

Boosting cycling stability by regulating surface oxygen vacancies of LNMO by rapid calcination

Surface Modification Mechanism of Spinel Structure LiM_xMn_(2-x)O_4 As Cathode Materials for Lithium Ion Batteries

Performance Improvement of Li-rich Layer-Structured Li1.2Mn0.54Ni0.13Co0.13O2 by Integration with Spinel LiNi0.5Mn1.5O4

Structure and Electrochemical Performance of Modificated LiMn<sub>2</sub>O<sub>4</sub> by S-Co Codoping and Nano SiO<sub>2</sub> Surface Coating

Inhibit the strain accumulation for 5 V spinel cathode by mitigating the phase separation during high voltage stage

Recent Progress of High Voltage Spinel LiMn1.5Ni0.5O4 Cathode Material for Lithium-Ion Battery: Surface Modification, Doping, Electrolyte, and Oxygen Deficiency