Abstract:Layered Li-rich and Mn-based oxides have been considered as competitive candidates for Li-ion batteries because of their high capacity (exceed 250 mAh g(-1)), environmentally benign, and low cost. However, their commercialization is restricted by their inherent drawbacks such as low initial coulombic efficiency, modest cycling performance and poor rate capability. To overcome these problems, we have proposed an construction strategy of a spinel-embedded and Li3PO4 modified Li[Li0.2Mn0.54Ni0.13Co0.12]O-2 oxides through a facile wet chemical deposition route. During the modification process, Li(+)in the pristine could be partially exchanged by H+ concomitant with the chemical deposition of Li3PO4. After a low-temperature calcination process, the spinel structure is formed accompanied with the extraction of H+ and the interaction between Li3PO4 coating layer and the surface of pristine particles was enhanced. The as-designed structure is characterized by Raman spectra, Energy-dispersive X-ray Spectroscopy (EDS), Transmission Electron Microscopy (TEM), and Cyclic Voltammetry (CV). The practical results confirm that the capacity retentions and rate capability are significantly improved after such modification. The modified sample delivers much higher capacity retention of 83.57% after 150 cycles at 1C rate compared with 70.44% for bare material. Our facile modification approach combines the advantage of spinel phase and Li-ion conductor Li3PO4 particles. It is very effective for the structural construction of robust electrolyte deteriorating durability as well as fast ion diffusion and storage capability in layered Li-rich and Mn-based oxides.

Enhanced High Power and Long Life Performance of Spinel LiMn2O4 with Li2MnO3 Coating for Lithium-Ion Batteries

Enhanced electrochemical performance of Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 cathode material coated with Li + -conductive Li 2 SiO 3 for lithium ion batteries

Enhanced Cycling Performance of Spinel LiMn 2 O 4 Coated with ZnMn 2 O 4 Shell

In Situ Nano-Coating on Li₁.₂Mn₀.₅₂Ni₀.₁₃Co₀.₁₃O₂ with a Layered@spinel@coating Layer Heterostructure for Lithium-Ion Batteries

Electrochemical Characterization of Surface-Modified LiMn 2 O 4 Cathode Materials for Li-ion Batteries

Improved Electrochemical Performances of Li- and Mn-Rich Layered Oxides 0.4li4/3mn2/3o2·0.6lini1/3co1/3mn1/3o2 Cathode Material by Co3O4 Coating

Enhanced Li Storage Performance of LiNi0.5Mn1.5O4–Coated 0.4li2mno3·0.6lini1/3co1/3mn1/3o2 Cathode Materials for Li-Ion Batteries

Improved elevated temperature performance of spinel LiMn2O4 via surface-modified by Li-rich Li1.2Ni0.2Mn0.6O2 for lithium-ion batteries

Spinel-embedded and Li3PO4 Modified Li[Li0.2Mn0.54Ni0.13Co0.13]O-2 Cathode Materials for High-Performance Li-Ion Battries

Surface Modification Mechanism of Spinel Structure LiM_xMn_(2-x)O_4 As Cathode Materials for Lithium Ion Batteries

Enhanced Electrochemical Performance of Li[Li0.2ni0.2mn0.6]O-2 Modified by Manganese Oxide Coating for Lithium-Ion Batteries

Electrochemical Studies on Al2O3-Coated Spinel LiMn2O4 for Lithium Ion Batteries

Improving rate capacity and cycling performance of lithium-rich high-Mn Li-1.8[Mn0.7Co0.15Ni0.15]O-2.675 cathode materials by Li2SiO3 coating

Li[Li0.2Mn0.54Ni0.13Co0.13]O2–LiMn1.5Ti0.5O4 Composite Cathodes with Improved Electrochemical Performance for Lithium Ion Batteries

Al 2 O 3 coating for improving thermal stability performance of manganese spinel battery

Enhanced electrochemical performance of Li-rich Li[Li0.2Mn0.52Ni0.13Co0.13V0.02]O2 cathode materials for lithium ion batteries by Li1.13Mn0.47Ni0.2Co0.2O2 coating

Enhanced high-temperature cycling stability of LiNi1/3Co1/3Mn1/3O2-coated LiMn2O4 as cathode material for lithium ion batteries

High-Performance Carbon-Coated Mesoporous Limn2o4 Cathode Materials Synthesized From A Novel Hydrated Layered-Spinel Lithium Manganate Composite

Lithium-Ion Conductivity Epitaxial Layer Contributing to the Structure and Cycling Stability of LiMn2O4 Cathodes

Synthesis and electrochemical performance of carbon-coated LiMn2O4

Retracted: In Situ Nano-Coating On Li1.2mn0.52ni0.13co0.13o2 With A Layered@Spinel@Coating Layer Heterostructure For Lithium-Ion Batteries (Retracted Article. See Vol.4,Pg.14884,2016)