Abstract:Spinel LiMn2O4 is one of the cathode active materials for the rechargeable lithium-ion batteries with the most potential, but suffers from a fast capacity fade when cycling at elevated temperatures (55 degrees C). Spinel LiMn1.97Ti0.03O4 coated with aluminum nitrate is heat-treated at various temperatures. The sample treated at low temperature (500 degrees C) exhibits porous Al2O3 layer coated on the surface, and little Al ion diffusing into the spinel structure. As for the sample treated at mid-temperature (700 degrees C), it exhibits double layers coated on the surface: the inner layer is LiAlxMn1.97-xTi0.03O4 solid solution and the outer layer is compact Al2O3 metal oxides. When the heat-treatment temperature increases to a high level (850 degrees C), nearly all the Al ion diffusing into the structure to form Al doped solid solution layer coated on the spinel. The relationship between the structure of the modified samples and their electrochemical properties is investigated. The galvanostatic charge-discharge results show that those surface-modified samples exhibit improved cycling performance compared to LiMn1.97Ti0.03O4; and the sample treated at mid-temperature delivers the best capacity retention, especially at 55 degrees C. The improved cycling performance is ascribed to the coated layers of Al2O3 and LiAlxMn1.97-xTi0.03O4 on the spinel particles. The Al2O3 layer could reduce the HF damage by scavenging of HF. While the LiAlxMn1.97-xTi0.03O4 layer could enhance the stability of the spinel structure due to the stronger Al-O bond; moreover, this coating layer having the same spinel structure with the LiMn1.97Ti0.03O4 core material would not hinder the lithium ion diffusion. The sample treated at mid-temperature has the double layers coated on the surface, and its Al2O3 coating becomes compact and thin which could effectively block the direct contact between the electrolyte and spinel particles as well as reduce the lithium ion diffusion distance in the inactive layer, leading to greatly improved capacity retention.

Surface Modification of Spinel Limn2o4 with Y2o3 for Lithium-Ion Battery

Surface Modification Mechanism of Spinel Structure LiM_xMn_(2-x)O_4 As Cathode Materials for Lithium Ion Batteries

Enhanced Cycling Performance of Spinel LiMn 2 O 4 Coated with ZnMn 2 O 4 Shell

Surface Modification of LiCo1/3Ni1/3Mn1/3O2 with Y2O3 for Lithium-Ion Battery

Surface Modification and Characterization of Spinel LiMn2O4 Coated with MgO

Electrochemical Performance of Spinel LiMn_2O_4 Modified

Study on the Spinel LiMn2O4 Coating with Cobalt Oxide

Electrochemical Characterization of Surface-Modified LiMn 2 O 4 Cathode Materials for Li-ion Batteries

Electrochemical Studies on Al2O3-Coated Spinel LiMn2O4 for Lithium Ion Batteries

Surface Modification of High Voltage Spinel LiNi 0.5 Mn 1.5 O 4 Cathode Material Manufactured via Co-precipitation

Surface Modification of Li1.03mn1.97o4 Spinels for Improved Capacity Retention

Study on Modification of Spinel LiMn2O4 by Overcoating

Modification by Simultaneously Γ-Wo3/li2wo4 Composite Coating and Spinel-Structure Formation on Li[Li0.2Mn0.54Ni0.13Co0.13]O2 Cathode Via a Simple Wet Process

Preparation, Characteristics and Electrochemical Properties of Surface-Modified Limn2o4 by Doped Lini0.05mn1.95o4

Enhanced High Power and Long Life Performance of Spinel LiMn2O4 with Li2MnO3 Coating for Lithium-Ion Batteries

Excellent Stability of Spinel Limn2o4-Based Composites for Lithium Ion Batteries

Novel method to enhance the cycling performance of spinel LiMn2O4

Double Roles of Aluminium Ion on Surface-Modified Spinel Limn1.97ti0.03o4

Structure and Electrochemical Performance of Modificated LiMn<sub>2</sub>O<sub>4</sub> by S-Co Codoping and Nano SiO<sub>2</sub> Surface Coating

Boosting the cycling performance of spinel LiMn2O4 by in situ MnBO3 coating

Enhanced electrochemical performances of 5 v spinel LiMn 1.58Ni0.42O4 cathode materials by coating with LiAlO2