Abstract:Since the monumental work conducted by Whitesides et al. in 2007, research and development of paper-based microfluidics has been widely carried out, with its applications ranging from chemical and biological detection and analysis, to environmental monitoring and food-safety inspection. Paper-based microfluidics possesses several competitive advantages over other substrate materials, such as being simple, inexpensive, power-free for fluid transport, lightweight, biodegradable, biocompatible, good for colorimetric tests, flammable for easy disposal of used paper-based diagnostic devices by incineration, and being chemically modifiable. Myriad methods have been demonstrated to fabricate paper-based microfluidics, such as solid wax printing, cutting, photolithography, microembossing, etc. In this study, fabrication of paper-based microfluidics was demonstrated by spray on the printed paper. Different from the normally used filter papers, printing paper, which is much more accessible and cheaper, was utilized as the substrate material. The toner was intended to serve as the mask and the patterned hydrophobic barrier was formed after spray and heating. The processing parameters such as toner coverage on the printing paper, properties of the hydrophobic spray, surface properties of the paper, and curing temperature and time were systematically investigated. It was found that, after repetitive printing four times, the toner was able to prevent the hydrophobic spray (the mixture of PDMS and ethyl acetate) from wicking through the printing paper. The overall processing time for fabrication of paper-based microfluidic chips was less than 10 min and the technique is potentially scalable. Glucose detection was conducted using the microfluidic paper-based analytical devices (μPADs) as fabricated and a linear relationship was obtained between 1 and 10 mM.

Printed electronics integrated with paper-based microfluidics: new methodologies for next-generation health care

Rapid Fabrication of Modular 3D Paper-Based Microfluidic Chips Using Projection-Based 3D Printing

A System-on-chip and Paper-Based Inkjet Printed Electrodes for a Hybrid Wearable Bio-Sensing System

Heterogeneous Integration of Bio-Sensing System-on-Chip and Printed Electronics

Hybrid Integration Technology For Wearable Sensor Systems

Fabrication of paper-based microfluidic sensors by printing.

A Low-Cost, Disposable and Portable Inkjet-Printed Biochip for the Developing World

Paper-based microfluidics for rapid diagnostics and drug delivery

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

Papertronics: Integrating Electronics and Microfluidics on Paper for Sustainable Electroanalysis

3D Printed Paper-Based Microfluidic Analytical Devices

Printable microfluidic systems using pressure sensitive adhesive material for biosensing devices

Low-cost Fabrication of a Paper-Based Microfluidic Using a Folded Pattern Paper.

Fabrication of Paper-Based Microfluidics by Spray on Printed Paper

Electrochemical Paper‐Based Microfluidics: Harnessing Capillary Flow for Advanced Diagnostics

Making Healthcare Accessible: A Rapid Clean-Room-Free Fabrication Strategy for Microfluidics-Driven Biosensors Based on Coupling Stereolithography and Hot Embossing

Hybrid Printing of Fully Integrated Microfluidic Devices for Biosensing

Directly Writing Barrier-Free Patterned Biosensors and Bioassays on Paper for Low-Cost Diagnostics

From functional structure to packaging: full-printing fabrication of a microfluidic chip.

A Simple Manufacturing Process for Paper-based Microfluidics Fabrication

Preparing of Interdigitated Microelectrode Arrays for AC Electrokinetic Devices Using Inkjet Printing of Silver Nanoparticles Ink