Abstract:Spark plasma sintering (SPS), a sintering method that uses the action of pulsed direct current and pressure, has received a lot of attention due to its capability of exerting control over the microstructure of the sintered material and flexibility in terms of the heating rate and heating mode. Historically, SPS was developed in search of ways to preserve a fine-grained structure of the sintered material while eliminating porosity and reaching a high relative density. These goals have, therefore, been pursued in the majority of studies on the behavior of materials during SPS. Recently, the potential of SPS for the fabrication of porous materials has been recognized. This article is the first review to focus on the achievements in this area. The major approaches to the formation of porous materials by SPS are described: partial densification of powders (under low pressures, in pressureless sintering processes or at low temperatures), sintering of hollow particles/spheres, sintering of porous particles, and sintering with removable space holders or pore formers. In the case of conductive materials processed by SPS using the first approach, the formation of inter-particle contacts may be associated with local melting and non-conventional mechanisms of mass transfer. Studies of the morphology and microstructure of the inter-particle contacts as well as modeling of the processes occurring at the inter-particle contacts help gain insights into the physics of the initial stage of SPS. For pre-consolidated specimens, an SPS device can be used as a furnace to heat the materials at a high rate, which can also be beneficial for controlling the formation of porous structures. In sintering with space holders, SPS processing allows controlling the structure of the pore walls. In this article, using the literature data and our own research results, we have discussed the formation and structure of porous metals, intermetallics, ceramics, and carbon materials obtained by SPS.

Use of Spark Plasma Sintering for Fabrication of Porous Titanium Aluminide Alloys from Elemental Powders

Preparation, Characterization and Designing of Porous Ti–6Al–4V Through Metal Injection Molding Without Space Holder

Microstructure, Densification and Mechanical Properties of Ti-22Al-25Nb Alloy Fabricated by Spark Plasma Sintering

The Microstructure Evolution, Mechanical Properties and Densification Mechanism of Tial-Based Alloys Prepared by Spark Plasma Sintering

Porous TiAl alloys fabricated by sintering of TiH 2 and Al powder mixtures

Spark Plasma Sintering of Titanium Aluminides: A Progress Review on Processing, Structure-Property Relations, Alloy Development and Challenges

Preparation of fine-grains TiAl alloys by mechanical alloying and spark plasma sintering

Fabrication of Titanium-Niobium-Zirconium-Tantalium Alloy (TNZT) Bioimplant Components with Controllable Porosity by Spark Plasma Sintering

In Situ Porous Alumina/aluminum Titanate Ceramic Composite Prepared by Spark Plasma Sintering from Nanostructured Powders

Effects of Annealing and Extrusion on the Microstructure and Tensile Properties of Ultrafine-Grained Al Fabricated by Spark Plasma Sintering

Effect of spark plasma sintering temperature on microstructure and mechanical properties of melt-spun TiAl alloys

Microstructures and Mechanical Properties of Ti-43Al-5V-4Nb-Y Alloy Consolidated by Spark Plasma Sintering

Fabrication of Porous Materials by Spark Plasma Sintering: A Review

Effect of Spark Plasma Sintering Temperature on the Microstructure and Mechanical Properties of A Ti2alc/Tial Composite

Spark Plasma Sintering of Pure Titanium: Microstructure and Mechanical Characteristics

Microstructure and mechanical properties of Ti-43Al-9V alloy fabricated by spark plasma sintering

Fabrication of high purity Ti3SiC2 from Ti/Si/C with the aids of Al by spark plasma sintering

Study on the Fabrication of Porous TiAl Alloy Via Non-Aqueous Gel Casting of a TiH2 and Al Powder Mixture

Microstructures and Mechanical Properties of TiAl Alloy Prepared by Spark Plasma Sintering

Microstructure Evolution and Mechanical Properties of Ti46.5Al2Cr1.8Nb-(W, B) Alloys Fabricated by Spark Plasma Sintering and Pulse Current Assisted Isothermal Forging

Mechanical and Electrochemical Corrosion Behaviors of Porous Ti-6Al-4V Alloys Prepared by an Electrochemical Sintering Approach