Microstructure and mechanical properties of Ti-43Al-9V alloy fabricated by spark plasma sintering

Lijuan Xu,Shulong Xiao,Yuyong Chen,WANG Juan

DOI: https://doi.org/10.1016/S1003-6326(11)61243-0

IF: 3.752

2012-01-01

Transactions of Nonferrous Metals Society of China

Abstract:A fine-grained TiAl alloy with the composition of Ti–43Al–9V was prepared by mechanical milling and spark plasma sintering (SPS). The relationship among sintering temperature, microstructure and mechanical properties was studied. The results show that the morphology of mechanical milling powder is regular with size in a range of 5–30 μm. Main phases of γ-TiAl, α2-Ti3Al and few B2 phase are observed in the SPS bulk samples. For samples sintered at 1150 °C, equiaxed crystal grain microstructure is achieved with size in a range of 300 nm-1 μm. With increasing SPS temperature to 1250 °C, the size of equiaxed crystal grains obviously increases, the microhardness decreases from HV592 to HV535, and the bending strength decreases from 605 to 219 MPa. Meantime, the compression fracture strength also decreases from 2601 to 1905 MPa, and the strain compression decreases from 28.95% to 12.09%.