Abstract:Multiple electron beam direct write lithography is an emerging technology promising to address new markets, such as truly unique chips for security applications. The tool under consideration, the Mapper FLX-1200, exposes long 2.2 μm-wide zones called stripes by groups of 49 beams. The critical dimensions inside and the registration errors between the stripes, called stitching, are controlled by internal tool metrology. Additionally, there is great need for on-wafer metrology of critical dimension and stitching to monitor Mapper tool performance and validate the internal metrology. Optical Critical Dimension (OCD) metrology is a workhorse technique for various semiconductor manufacturing tools, such as deposition, etching, chemical-mechanical polishing and lithography machines. Previous works have shown the feasibility to measure the critical dimension of non-uniform targets by introducing an effective CD and shown that the non-uniformity can be quantified by a machine learning approach. This paper seeks to extend the previous work and presents a preliminary feasibility study to monitor stitching errors by measuring on a scatterometry tool with multiple optical channels. A wafer with OCD targets that mimic the various lithographic errors typical to the Mapper technology was created by variable shaped beam (VSB) e-beam lithography. The lithography process has been carefully tuned to minimize optically active systematic errors such as critical dimension gradients. The OCD targets contain horizontal and vertical gratings with a pitch of 100 nm and a nominal CD of 50 nm, and contain various stitching error types such as displacement in X, Y and diagonal gratings. Sensitivity to all stitching types has been shown. The DX targets showed non-linearity with respect to error size and typically were a factor of 3 less sensitive than the promising performance of DY targets. A similar performance difference has seen in nominally identical diagonal gratings exposed with vertical and horizontal lines, suggesting that OCD metrology for DX cannot be fully characterized due to lithography errors in gratings with vertical lines.

Through-Pellicle Capable, Duv-Based Cd Metrology On Reticles For Wafer Fab And R&D Environment

Implementation Of 248nm Based Cd Metrology For Advanced Reticle Production

Fully Automated Cd - Metrology And Mask Inspection In A Mask Production Environment Using The Muetec < M5k > Duv Tool

Laser Direct Writing System and Its Lithography Properties

Metrology of EUV Masks by EUV-Scatterometry and Finite Element Analysis

Comparison of EUV Photomask Metrology Between CD-AFM and TEM

Measurements of CD and sidewall profile of EUV photomask structures using CD-AFM and tilting-AFM

Implementation of New Reticle Inspection Technology for Progressive Mask Defect Detection Strategy in Wafer Fabs

Feasibility of monitoring a multiple e-beam tool using scatterometry and machine learning: stitching error detection

Sidewall angle calculation on CD-SEM metrology

Limits of model-based CD-SEM metrology

The Develop History of Metrology for the Transparent Film Pre and Post CMP

Advanced CD-SEM solution for edge placement error characterization of BEOL pitch 32nm metal layers

Lithography printability review: an application on advanced photomask production for enhancing mask yield and cycle time

Nondestructive Metrology for Nanoimprint Processes

CD-SEM real time bias correction using reference metrology based modeling

Performance validation of Mapper's FLX-1200

Monte Carlo Simulation of Cd-Sem Images for Linewidth and Critical Dimension Metrology

Mask characteristics for projection electron-beam lithography with demagnification imaging

Diagnosing and removing CD-SEM metrology artifacts

Rapid prototyping of etch test structures for hard mask development using electron beam lithography