Abstract:Multiple electron beam direct write lithography is an emerging technology promising to address new markets, such as truly unique chips for security applications. The tool under consideration, the Mapper FLX-1200, exposes long 2.2 μm-wide zones called stripes by groups of 49 beams. The critical dimensions inside and the registration errors between the stripes, called stitching, are controlled by internal tool metrology. Additionally, there is great need for on-wafer metrology of critical dimension and stitching to monitor Mapper tool performance and validate the internal metrology. Optical Critical Dimension (OCD) metrology is a workhorse technique for various semiconductor manufacturing tools, such as deposition, etching, chemical-mechanical polishing and lithography machines. Previous works have shown the feasibility to measure the critical dimension of non-uniform targets by introducing an effective CD and shown that the non-uniformity can be quantified by a machine learning approach. This paper seeks to extend the previous work and presents a preliminary feasibility study to monitor stitching errors by measuring on a scatterometry tool with multiple optical channels. A wafer with OCD targets that mimic the various lithographic errors typical to the Mapper technology was created by variable shaped beam (VSB) e-beam lithography. The lithography process has been carefully tuned to minimize optically active systematic errors such as critical dimension gradients. The OCD targets contain horizontal and vertical gratings with a pitch of 100 nm and a nominal CD of 50 nm, and contain various stitching error types such as displacement in X, Y and diagonal gratings. Sensitivity to all stitching types has been shown. The DX targets showed non-linearity with respect to error size and typically were a factor of 3 less sensitive than the promising performance of DY targets. A similar performance difference has seen in nominally identical diagonal gratings exposed with vertical and horizontal lines, suggesting that OCD metrology for DX cannot be fully characterized due to lithography errors in gratings with vertical lines.

Advanced CD-SEM solution for edge placement error characterization of BEOL pitch 32nm metal layers

Investigating metal oxide resists for patterning 28-nm pitch structures using single exposure extreme ultraviolet: defectivity, electrical test, and voltage contrast study

Analysis of Linewidth Uniformity and Line Edge/Width Roughness in a 5 Nm Logic SAQP Process

CD-SEM real time bias correction using reference metrology based modeling

Feasibility of monitoring a multiple e-beam tool using scatterometry and machine learning: stitching error detection

Massive metrology and inspection solution for EUV by area inspection SEM with machine learning technology

Implementation Of 248nm Based Cd Metrology For Advanced Reticle Production

Diagnosing and removing CD-SEM metrology artifacts

Limits of model-based CD-SEM metrology

Through-Pellicle Capable, Duv-Based Cd Metrology On Reticles For Wafer Fab And R&D Environment

5 NM FIN SAQP PROCESS DEVELOPMENT AND KEY PROCESS CHALLENGE DISCUSSION

Ellipsometric critical dimension metrology employing mid-infrared wavelengths for high-aspect-ratio channel hole module etch processes

Introducing machine learning-based application for writer main pole CD metrology by dual beam FIB/SEM

What is prevalent CD-SEM's role in EUV era?

Rapid prototyping of etch test structures for hard mask development using electron beam lithography

Monte Carlo Simulation of Cd-Sem Images for Linewidth and Critical Dimension Metrology

7nm Chip-Package Interaction Study on a Fine Pitch Flip Chip Package with Laser Assisted Bonding and Mass Reflow Technology

Study of Plug Etch back process matching on faraday shielded ICP and traditional CCP plasma ETCH chambers

28nm pitch single exposure patterning readiness by metal oxide resist on 0.33NA EUV lithography

Optimizing focus and dose process windows for robust process control using a multi-feature analysis

Measurement and Calculation Method for Sub-20 Nm Line and DSA Patterns