Abstract:Imprint lithography is an effective and well-known technique for replication of nano-scale features. Nanoimprint lithography (NIL) manufacturing equipment utilizes a patterning technology that involves the field-by-field deposition and exposure of a low viscosity resist deposited by jetting technology onto the substrate. The patterned mask is lowered into the fluid which then quickly flows into the relief patterns in the mask by capillary action. Following this filling step, the resist is crosslinked under UV radiation, and then the mask is removed, leaving a patterned resist on the substrate. The technology faithfully reproduces patterns with a higher resolution and greater uniformity compared to those produced by photolithography equipment. Additionally, as this technology does not require an array of wide-diameter lenses and the expensive light sources necessary for advanced photolithography equipment, NIL equipment achieves a simpler, more compact design, allowing for multiple units to be clustered together for increased productivity. Previous studies have demonstrated NIL resolution better than 10nm, making the technology suitable for the printing of several generations of critical memory levels with a single mask. In addition, resist is applied only where necessary, thereby eliminating material waste. Given that there are no complicated optics in the imprint system, the reduction in the cost of the tool, when combined with simple single level processing and zero waste leads to a cost model that is very compelling for semiconductor memory applications. Any new lithographic technology to be introduced into manufacturing must deliver either a performance advantage or a cost advantage. Key technical attributes include alignment, overlay and throughput. In previous papers, overlay and throughput results have been reported on test wafers. In this work, we review progress on pattern capability, throughput, mask life and overlay. To minimize distortion and improve overlay, a Drop Pattern Compensation (DPC) method has been implemented to minimize the added overlay distortion terms. In this paper we describe the origins of the out of plane errors, and describe the method used to correct these errors along with some examples. Improvements to both cross matched machine overlay (XMMO) and imprint mix and match overlay (IMMO) are presented.

Lithography printability review: an application on advanced photomask production for enhancing mask yield and cycle time

Implementation of an Efficient Defect Classification Method in Photomask Mass Production

Fast Level-Set-Based Inverse Lithography Algorithm for Process Robustness Improvement and Its Application

A New Level-Set-Based Inverse Lithography Algorithm for Process Robustness Improvement with Attenuated Phase Shift Mask

From Computational Lithography to Computational Inspection: Inverse Lithography Technology (ILT) and Inverse Inspection Technology (IIT)

Patterning, mask life, throughput and overlay improvements for high volume semiconductor manufacturing using nanoimprint lithography

Implementation of New Reticle Inspection Technology for Progressive Mask Defect Detection Strategy in Wafer Fabs

Multi-step exposure method for improving structure flatness in digital light processing-based printing

Regularized Level-Set-based Inverse Lithography Algorithm for IC Mask Synthesis

Near-field sub-diffraction photolithography with an elastomeric photomask

Considerations in the Setting Up of Industry Standards for Photolithography Process, Historical Perspectives, Methodologies, and Outlook

Imaging Analysis of Nanolithography Based on Surface-Plasmon Polariton

Pushing Multiple Patterning in Sub-10Nm: Are We Ready?

Source and Mask Co-Optimization Using A Gradient Based Method in Optical Lithography

GPU-Accelerated Inverse Lithography Towards High Quality Curvy Mask Generation

Prototyping of Masks, Masters, and Stamps/molds for Soft Lithography Using an Office Printer and Photographic Reduction

Development of a Lithography Simulation Tool Set in Various Optical Conditions for Source Mask Optimization

Rapid prototyping of etch test structures for hard mask development using electron beam lithography

Mask characteristics for projection electron-beam lithography with demagnification imaging

Improving the Edge Profiles of Lithography Patterns Using Gray-Tone Technique in Digital Photolithography

Progress in the fabrication of low-defect density mask blanks for extreme ultraviolet lithography