Abstract:Large-scale 2219 Al alloy rings are widely used as important parts on launch vehicles and thus have high requirements for the mechanical properties of rings in different direction, which are associated with coarse second-phase particles. Therefore, the objective of this study is to provide a comprehensive and systematic quantitative analysis of the effect degree of the coarse second-phase particles characteristics on the mechanical properties of 2219 Al alloy rings in different direction, so as to guide the design and optimization of the global process based on the relationship between each process and the coarse second-phase particles. Firstly, according to the features of the coarse second-phase particles characteristics in the experimental results, a reliable research scheme with the particles size, percentage and distribution as the study variable was designed. Then, based on the experimental characterization results, a representation volume element modeling method incorporating coarse second-phase particles characteristics was developed. The representation volume element finite element models for different research schemes were established in the ABAQUS/EXPLICIT platform respectively. Next, the comparison of experimental and numerical simulation results verifies that the finite element model with coarse second-phase particles developed in this paper can accurately predict ultimate tensile strength and elongation of the tested specimen. Finally, based on the numerical simulation results of the different research schemes, the effects of different sizes, percentages and distributions of coarse second-phase particles on the mechanical properties of the ring are analyzed to determine the extent to which the mechanical properties can be improved with different coarse second-phase particles characteristics. By exploring the relationship between the manufacture process, coarse second-phase particles characteristics and mechanical properties, the design and optimization of the manufacture process for different mechanical properties requirements are guided. This study is valuable in achieving comprehensive regulation of the mechanical properties of large-scale 2219 Al alloy rings.

Analysis of Structural Parameters of Metal Multi-convolution Ring

Dynamic Sensitivity Analysis of Complex Structure Based on FEM

Analysis on the Mechanical and Sealing Properties of Metallic C Ring

Structural Parameter Analysis of Self-Tightening Metal U-Shaped Seal Ring

Parametric Analysis of Wave-shaped Metal Sealing Ring Based on Hierarchical Solution Method

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Investigation of the Diffluence Mechanism of an Aluminium Alloy Ring under Compression

Research on Effect Factors of Axial Stiffness of Metallic W-ring

Forming process chain for manufacturing complex conical-section profiled rings: On a co-design method

Study on Cavity Filling Defects and Tensile Properties of L-Shaped Profiled Rings

Design and finite element analysis of a variable cross-section cutter ring

Multi-objective optimization of cavity design for GH4738 superalloy profile ring rolling process based on FEM and RSM

Buckling Defect Optimization of Constrained Ring Rolling of Thin-Walled Conical Rings with Inner High Ribs Combining Response Surface Method with FEM

Analytical calculation model for radial-axial coordinated feed strategy in large-scale flat ring rolling based on ultimate bending moment

Effect of coarse second-phase particles on mechanical properties of large-scale 2219 Al alloy rings

Mechanical Property Research of Different Materials for Supporting Rings

Multi-objective optimization of parametric design for profile ring rolling process based on residual stress control

Comprehensive Performance Optimal Design of Metallic W-ring under Working Conditions

Numerical Simulation for Forging Process of Bearing Rings

Structural Design and Dynamic Analysis of Carbon Fiber Reinforced Plastic Shaft with Metal Parts

Mechanical properties analysis of medical endodontic instruments based on parameterization