Abstract:The inserted sealing tool is a critical downhole implement that is used to balance the downhole pressure in multistage fracturing operations and prevent fracturing fluid from overflow and/or backward flow. The sealing ring of an inserted sealing tool plays an important role in downhole sealing since a sealing failure would ail the fracturing operation. In order to improve the sealing performance and reduce the potential fracturing failures, this research aims to investigate the influence of V-shaped sealing ring geometries on sealing performance. Constitutive experiments of rubber materials were carried out and the parameters of the constitutive relationship of rubber materials were obtained. A two-dimensional axisymmetric model considering the sealing ring has been established and influences are investigated with considerations of various system parameters and operating conditions. It is found that the stresses concentrated at the shoulder and inner vertex of the sealing ring have direct impact on the damage of the sealing rings under operational conditions. Moreover, the sealing interference, among several other factors, greatly affects the life of the sealing ring. A new design of the sealing ring is suggested with optimized geometric parameters. Its geometric parameters are the edge height of 5 mm, the vertex angle of 90°–100°, and the interference of 0.1 mm, which show a better performance and prolonged operation life of the sealing ring.

Structural Parameter Analysis of Self-Tightening Metal U-Shaped Seal Ring

Finite element analysis and structural optimization of V-shaped seal ring based on ANSYS Workbench

Research on Key Factors of Sealing Performance of Combined Sealing Ring

Sealing Failure Analysis on V-Shaped Sealing Rings of an Inserted Sealing Tool Used for Multistage Fracturing Processes

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Three-dimensional finite element analysis of O-ring metal seals considering varying material properties and different seal diameters

Analysis and Optimization of Structure Parameters of Hydrostatic Mechanical Seal

Study on the Influence of Structure and Material Parameters on Dynamic Sealing Characteristics of Composite Seal Ring

Research on Effect Factors of Axial Stiffness of Metallic W-ring

Structural Design and Sealing Performance Analysis of Biomimetic Sealing Ring

Static and Dynamic Sealing Performance Analysis of Rubber D-Ring Based on FEM

Research on Sealing Performance of W-shaped Metal Sealing Ring Based on ABAQUS

Analysis on the Mechanical and Sealing Properties of Metallic C Ring

A design study on metal C-ring seals

Analysis of Structural Parameters of Metal Multi-convolution Ring

Gas Sealing Performance Study of Metal W Shaped Seal Ring

Parametric Analysis of Wave-shaped Metal Sealing Ring Based on Hierarchical Solution Method

Analysis of material fault of O-ring seal in aircraft cylinder

Parameters Optimization of the Shallow-slot Split Floating Ring Seal

Effect of Swelling Behavior of Rubber Rings on the Sealing Performance for 70MPA Hydrogen Pressure Reducing Valves

An Assessment Method of Sealing Performance and Stress Intensity Factors at Crack Tip of Subsea Connector Metal Sealing Rings