Abstract:In this paper, we experimentally demonstrated a bending sensor based on Michelson interferometer (MI). The sensor was fabricated by fusion splicing single-mode fiber (SMF) and multimode fiber (MMF) spheres. The improved end-face packaging scheme was adopted to realize the measurement of bending. The advantage of MMF numerical aperture increases the mode field diameter and the number of modes. Fiber bending induces transition between modes, resulting in the generation and fade of fiber modes, achieving the emergence of bending turning points (BTPs). The BTP is defined as the point where the direction of interference dip shift changes due to fiber bending. By observing the direction of interference dip shift during bending, the degree of bending can be intuitively estimated. The simulation results verify the generation and fade of excited modes in the bending MMF peanut-like structure, which are in good agreement with the experimental results. When the sensor is installed in parallel and titled ways, due to the uneven force of the plate in the bending state, it shows the differences in sensitivity, BTP and initial bending response. Further, the BTP can be roughly adjusted by the MMF core diameter, and the deviation of the sensitivity is reflected in the length of the interference arm. Besides, compact size, low cost and low hysteresis make the sensor more competitive in harsh environment applications.

Self-referenced Fiber Microbend Displacement Sensor Based on Dual-Wavelength Fiber-Bragg Gratings Interposed with a Multimode Fiber Micro Bender

Highly Sensitive Displacement Sensor Based on Composite Interference Established Within a Balloon-Shaped Bent Multimode Fiber Structure.

Simultaneous Measurement of Displacement and Temperature Based on Two Cascaded Balloon-Like Bent Fibre Structures

Temperature-Independent Fiber Bragg Grating Micro-Displacement Sensor

Micro-bending Sensing Based on Single-Mode Fiber Spliced Multimode Fiber Bragg Grating Structure

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Power-compensated displacement sensing based on single mode-multimode fiber Bragg grating structure

Temperature-compensated fiber directional-bend sensor based on a sandwiched MMF–PMPCF structure

Displacement Sensor Based on a Small U-Shaped Single-Mode Fiber

Simultaneous displacement, temperature and strain sensing system based on fiber macro-bend loss and edge filter

A Low-Cost Multimode Fiber Bragg Grating Sensor System

A single-mode-deformed multimode-single-mode fiber structure for simultaneous measurement of curvature and temperature

Fiber Bending Sensor with Turning Point in a Multimode Fiber Peanut-Like Structure

A novel temperature-insensitive fiber Bragg grating sensor for displacement measurement

High sensitivity micro-displacement sensor based on fiber Bragg grating and amplification substrate

Bend Vector Sensor Based on Long Period Fiber Grating Inscribed in Mismatched Twin Core Fiber

Micro-displacement sensors based on plastic photonic bandgap Bragg fibers

A Temperature-Insensitive Multipoint Displacement Sensing System Based on Fiber Macro-bending Loss

A Novel Micro Fiber Bragg Grating Displacement Sensor

Compact Fiber Bending Sensor Based On Superimposed Gratings