Abstract:In this paper, the sensor was proposed by combination of grapefruit photonic crystal fiber (GPCF) and femtosecond laser fabricated fiber Bragg grating (FBG) based on Sagnac interferometer. The GPCF was sandwiched between two single-mode fibers (SMFS) to form a SMF-GPCF-SMF structure, which was based on intermodal interference. The FBG with a central wavelength of 1535.32 nm was inscribed through polyimide coating and cladding by the femtosecond laser point-by-point inscribing method. The spectrum drift data of sensing structure were collected and the dual-parameters matrix of temperature-strain was constructed to realize the simultaneous measurement of temperature and strain. The experimental results showed that the linear range of the strain measurement was from 0 mu epsilon to 2,000 mu epsilon at different temperature, the wavelength of FBG and GPCF was red drift and blue drift, respectively, the average strain sensitivity at different temperature was 1.25 pm/mu epsilon and -2.05 pm/mu epsilon, all the linearity R-2 are higher than 0.999, and has the high repeatability. The linear range of temperature measurement was from 20 degrees C to 450 degrees C, the wavelength of FBG and GPCF was red drift and blue drift, respectively, the temperature sensitivity of FBG and GPCF was 15.17 pm degrees C-1 and -8.87 pm degrees C-1, the linearity was 0.99983 and 0.99989, respectively.

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Strain and Temperature Discrimination Using a Fiber Bragg Grating and Multimode Interference Effects

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Investigation of Sensitivity Enhancing and Temperature Compensation for Fiber Bragg Grating (Fbg)-Based Strain Sensor

A simple temperature-independent strain sensor using a fiber BRAGG grating

A novel temperature-insensitive fiber Bragg grating sensor for displacement measurement

Displacement and Temperature Simultaneous Measurement with Single Fiber Bragg Grating

Temperature-Independent Fiber Bragg Grating Micro-Displacement Sensor

Temperature insensitive fiber optical displacement sensors based on double fiber Bragg gratings

FBG-EFPI Sensor for Large Strain Measurement with Low Temperature Crosstalk

High Temperature and Strain Dual-Parameters Fiber Sensing Based on Intermodal Interference and Femtosecond Laser Fabricated Fiber Bragg Grating

Temperature-Insensitive Fiber Bragg Grating Strain Sensor

A Dual-Parameter Fiber Sensor Based on Few-Mode Fiber and Fiber Bragg Grating for Strain and Temperature Sensing

Temperature-Insensitive and Sensitivity-Enhanced FBG Strain Sensor by Using Parallel MPF

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

A Novel Double-Arched-Beam-Based Fiber Bragg Grating Sensor for Displacement Measurement

Strain Sensing Measurement Technology For Fiber Bragg Grating With Holder Type Temperature Self-Compensation