Abstract:A high-sensitivity fiber-optic strain sensor, based on the Vernier effect and separated Fabry–Perot interferometers (FPIs), is proposed and experimentally demonstrated. One air-cavity FPI is used as a sensing FPI (SFPI) and another is used as a matched FPI (MFPI) to generate the Vernier effect. The two FPIs are connected by a fiber link but separated by a long section of single-mode fiber (SMF). The SFPI is fabricated by splicing a section of microfiber between two SMFs with a large lateral offset, and the MFPI is formed by a section of hollow-core fiber sandwiched between two SMFs. By using the Vernier effect, the strain sensitivity of the proposed sensor reaches <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{1.15 nm/}\mu \varepsilon $</tex-math></inline-formula> , which is the highest strain sensitivity of an FPI-based sensor reported so far. Owing to the separated structure of the proposed sensor, the MFPI can be isolated from the SFPI and the detection environment. Therefore, the MFPI is not affected by external physical quantities (such as strain and temperature) and thus has a very low temperature cross-sensitivity. The experimental results show that a low-temperature cross-sensitivity of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{0.056 } \mu \varepsilon /^ {\circ }{\text{C}}$</tex-math></inline-formula> can be obtained with the proposed sensor. With its advantages of simple fabrication, high strain sensitivity, and low-temperature cross-sensitivity, the proposed sensor has great application prospects in several fields.

FBG-EFPI Sensor for Large Strain Measurement with Low Temperature Crosstalk

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Simultaneous Measurement of Strain and Temperature by Two Peanut Tapers with Embedded Fiber Bragg Grating.

Strain and Temperature Discrimination Using a Fiber Bragg Grating and Multimode Interference Effects

Simultaneous Strain and Temperature Measurement Using an Integrated Fibre Bragg Grating Extrinsic Fabry-Perot Sensor

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

Strain and High-Temperature Discrimination Using A Type Ii Fiber Bragg Grating and A Miniature Fiber Fabry-Perot Interferometer

Low temperature crosstalk optical fiber Fabry-Perot interferometers for highly sensitivity strain measurement based on parallel Vernier effect

A Dual-Parameter Fiber Sensor Based on Few-Mode Fiber and Fiber Bragg Grating for Strain and Temperature Sensing

Compact Fiber Sensor With High Spatial Resolution for Simultaneous Strain and Temperature Measurement

Simultaneous Measurement of Temperature and Strain Using Spheroidal-Cavity-Overlapped FBG

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature

All-Fiber Fabry-Perot Micro-cavity Temperature-Insensitive Sensor for Strain Sensing Based on T-shaped Structure

High Temperature and Strain Dual-Parameters Fiber Sensing Based on Intermodal Interference and Femtosecond Laser Fabricated Fiber Bragg Grating

Integration of Miniature Fabry–Perot Fiber Optic Sensor with FBG for the Measurement of Temperature and Strain

High-sensitivity fiber-optic strain sensor based on the Vernier effect and separated Fabry—Perot interferometers

Ultra-high sensitivity and temperature-compensated Fabry–Perot strain sensor based on tapered FBG