Abstract:An ultrahigh sensitivity sensor for temperature and strain measurement based on Solc-Sagnac interferometer is demonstrated, which is fabricated by fusing two segments of polarization maintaining fiber (PMF) with a rotation angle. As the lengths of the two PMFs are close to each other, a vernier effect is generated. Through theoretical and simulation analysis, it is found that as the fusion angle is 90°, the envelope can be eliminated and the waveform similar to that of ordinary single-ring Sagnac interferometer is realized. The longer PMF serves as the sensing part, and the changes in temperature and strain cause variations in the birefringence of the sensing fiber which leads to the shift of the interference signal. Three sets of temperature sensing experiments are carried out to demonstrate the influences of the length parameters of the two PMFs on the sensitivity. We find the temperature sensitivities are 16.9, 32.6, and 43.8 nm/°C, respectively, which is improved by 11.3, 21.9, and 29.4 times compared to the ordinary single-ring Sagnac interferometer. Meanwhile, the optimal fiber structure is used for strain sensing experiments whose sensitivity is 785 pm/ $\mu \varepsilon $ which increases by 28.8 times compared with ordinary single-loop interferometer. Then, the dual parameter measurement of temperature and strain is realized by using coefficient matrix. From the experimental results, it can be seen that the fiber structure with a fusion angle of 90° has the vernier effect to achieve the amplification of sensitivity and the corresponding interferometer possesses the advantages of easy demodulation and high accuracy due to the simple waveform.

High Sensitivity, Low Temperature-Crosstalk Strain Sensor Based on a Microsphere Embedded Fabry–Perot Interferometer

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

Highly Sensitive Strain Sensor Based on the Vernier Effect With High Extinction Ratio and Low-Temperature Cross-Sensitivity by Compact Double FPI

High-sensitivity Strain Sensor with an In-Fiber Air-Bubble Fabry-Perot Interferometer

Ultra-high Sensitivity Strain Sensor Based on Biconical Fiber with a Bulge Air-Bubble

A Fabry-Perot Interferometer Sensor Based on a Microsphere Tellurite Fiber Probe for Temperature and Hydraulic Pressure Measurement

Ultrasensitive Temperature and Strain Sensor Based on a Hybrid Fiber Interferometer With the Vernier Effect

Ultra-sensitive strain sensor composed of tapered two-mode fiber micro-cantilever inserted into quartz capillary

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Temperature compensation high strain measure ment based on a Fabry-Perot interferometer with the virtual-assisted Vernier effect

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

Temperature-insensitive fiber optic Fabry-Perot interferometer based on special air cavity for transverse load and strain measurements.

Ultra-High Sensitivity and Temperature-Insensitive Optical Fiber Strain Sensor Based on Dual Air Cavities

High-Sensitivity Microfiber Strain and Force Sensors

Fiber-Optic Hybrid-Structured Fabry–Perot Interferometer Based on Large Lateral Offset Splicing for Simultaneous Measurement of Strain and Temperature

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Spheroidal Fabry-Perot microcavities in optical fibers for high-sensitivity sensing

Hybrid Interferometer Sensor Based on the Enhanced Vernier Effect for the Simultaneous Measurement of Strain and Temperature

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

Ultra-high Sensitivity Sensor for Temperature and Strain Measurement Based on Solc-Sagnac Interferometer