Abstract:A high-sensitivity fiber-optic strain sensor, based on the Vernier effect and separated Fabry–Perot interferometers (FPIs), is proposed and experimentally demonstrated. One air-cavity FPI is used as a sensing FPI (SFPI) and another is used as a matched FPI (MFPI) to generate the Vernier effect. The two FPIs are connected by a fiber link but separated by a long section of single-mode fiber (SMF). The SFPI is fabricated by splicing a section of microfiber between two SMFs with a large lateral offset, and the MFPI is formed by a section of hollow-core fiber sandwiched between two SMFs. By using the Vernier effect, the strain sensitivity of the proposed sensor reaches <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{1.15 nm/}\mu \varepsilon $</tex-math></inline-formula> , which is the highest strain sensitivity of an FPI-based sensor reported so far. Owing to the separated structure of the proposed sensor, the MFPI can be isolated from the SFPI and the detection environment. Therefore, the MFPI is not affected by external physical quantities (such as strain and temperature) and thus has a very low temperature cross-sensitivity. The experimental results show that a low-temperature cross-sensitivity of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{0.056 } \mu \varepsilon /^ {\circ }{\text{C}}$</tex-math></inline-formula> can be obtained with the proposed sensor. With its advantages of simple fabrication, high strain sensitivity, and low-temperature cross-sensitivity, the proposed sensor has great application prospects in several fields.

Fiber-Optic Hybrid-Structured Fabry–Perot Interferometer Based on Large Lateral Offset Splicing for Simultaneous Measurement of Strain and Temperature

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

A Fabry-Perot Interferometer for Simultaneous Measuring Temperature and Strain Based on Sapphire-Derived Fiber-Air

High Sensitivity Fabry-Perot Interferometer Based on Offset Splicing Fibers and Vernier Effect for Strain Measurement

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Temperature-insensitive fiber optic Fabry-Perot interferometer based on special air cavity for transverse load and strain measurements.

Temperature and Strain Response of In-Fiber Air-Cavity Fabry-Perot Interferometer under Extreme Temperature Condition

Simultaneous Measurement of Temperature and Strain Based on All-Fiber Fabry-Perot Sensor

Ultrasensitive Temperature and Strain Sensor Based on a Hybrid Fiber Interferometer With the Vernier Effect

Simultaneous measurement of transverse load and temperature using hybrid structured fiber-optic Fabry–Perot interferometer

A Composite Fabry-Perot Interferometric Sensor with the Dual-Cavity Structure for Simultaneous Measurement of High Temperature and Strain

Temperature compensation high strain measure ment based on a Fabry-Perot interferometer with the virtual-assisted Vernier effect

Fiber-optic Hybrid Structure Sensor for Simultaneous Measurement of Transverse Load and Temperature

Simultaneous Measurement of High Temperature and Strain Based on Miniature Tip-Packaged Dual-Fpis

Cascaded-cavity Fabry–Perot Interferometer for Simultaneous Measurement of Temperature and Strain with Cross-Sensitivity Compensation

Pcf-Based Fabry-Perot Interferometric Sensor For Strain Measurement Under High-Temperature

A high-sensitivity temperature sensor based on liquid-infiltrated large lateral offset structure

High-sensitivity fiber-optic strain sensor based on the Vernier effect and separated Fabry—Perot interferometers

Simultaneous Measurement of Strain and Temperature Using Fabry–Pérot Interferometry and Antiresonant Mechanism in a Hollow-Core Fiber

Temperature-insensitive strain sensor based on in-line Fabry-Perot interferometer

Discrete amplified sensing of temperature and strain