Abstract:FBG(fiber Bragg grating) strain sensor are widely applied in structure health monitoring, the temperature compensation problem is a key issue that impact the performance of the strain sensor, many kinds of temperature compensation method also have been put forward, but the compensation result get from these method can't meet the engineering requirements very well, especially when the ambient temperature changes rapidly due to the sunshine, the wind, the rain or other factors, and these impact can't avoid when monitoring an open-air structure project. Through engineering case and experiments test found that, the inaccurate compensation temperature is the key reason lead to test result error, and closer analysis could found that the temperature from strain sensitive FBG and temperature sensitive FBG have non synchronous phenomenon, and the error could be reach 1 degrees Celsius, so use the temperature from the same moment to compensate the strain calculation also can't get accurate results. The author thinks that the temperature non synchronous phenomenon may be caused by the temperature sensitive FBG and strain sensitive FBG have different package structure or package material, also may be installed on different positions, because all of these factors may lead to inconsistent temperature response speed between the two FBG when the ambient temperature changed rapidly. In order to confirm this conclusion, designed a FBG strain sensor package structure, the temperature sensitive FBG and strain sensitive FBG are packaged in one and the same structure with special stress isolation mechanism. Through temperature chamber test and engineering simulation experiment verified that the compensation temperature error could be reduced to 0.1 degrees Celsius, this will greatly improve the accuracy of temperature compensation for the FBG strain sensor.

Investigation of Sensitivity Enhancing and Temperature Compensation for Fiber Bragg Grating (Fbg)-Based Strain Sensor

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Sensitivity Enhancement Of Fbg-Based Strain Sensor

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Development of a High-Sensitivity and Adjustable FBG Strain Sensor for Structural Monitoring

Strain Sensing Measurement Technology For Fiber Bragg Grating With Holder Type Temperature Self-Compensation

Research on Temperature Compensation of Fiber Bragg Grating Current Sensor

Analysis of the Performance of Temperature Compensation for Fiber Bragg Grating Strain Sensor

Experimental Study on Temperature and Strain Sensing Characteristics of Fiber Bragg Grating

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

High-sensitivity Fiber Bragg Grating Strain Sensor of the Substrate Type.

Study of a Long-Gauge FBG Strain Sensor with Enhanced Sensitivity and Its Application in Structural Monitoring

Study on Strain and Temperature Cross Sensitivity of Fiber Bragg Grating Sensor

Non-Gel Encapsulation Process of a High Temperature Strain Fiber Bragg Grating Sensor and Its Sensing Properties

Sensitivity-Improved Strain Sensor Over A Large Range Of Temperatures Using An Etched And Regenerated Fiber Bragg Grating

Sensitivity enhanced strain and temperature measurements based on FBG and frequency chirp magnification.

Strain and Temperature Discrimination Using a Fiber Bragg Grating and Multimode Interference Effects

Design of micro FBG strain sensor with enhanced sensitivity

Cantilever vibration sensor based on Fiber Bragg Grating temperature compensation

Modeling and Analysis of a Combined Stress-Vibration Fiber Bragg Grating Sensor.

Temperature-Compensated Multi-Point Strain Sensing Based on Cascaded FBG and Optical FMCW Interferometry