Abstract:A temperature-compensated fiber Bragg grating (FBG) axial strain sensor based on a two-dual-loop optoelectronic oscillator (OEO) with the enhanced Vernier effect is proposed and experimentally demonstrated. The sensing head consists of two cascaded FBGs, one of which acts as a sensing FBG to measure both the axial strain and temperature and the other as a reference FBG to detect temperature. Acting as the optical carrier, the reflected optical signal of the sensing head is divided into two paths with opposite dispersion coefficients and slightly different lengths to achieve an enhanced Vernier effect. After being divided by a wavelength division multiplexer, the optical signal launches into two electrical paths with different electrical bandpass filters (EBPFs) for frequency division multiplexing. The EBPF I selects the microwave signal generated by the sensing FBG, while the EBPF II selects the microwave signal generated by the reference FBG. Therefore, the axial strain and temperature can be recovered by recording the microwave frequency within EBPF I, and the temperature can be interrogated by tracking the microwave frequency within EBPF II. The axial strain applied on the sensing FBG can be distinguished by solving the cross-sensitivity matrix. The results show that the sensitivity of the dual-loop OEO is much greater than that of the single-loop OEO. The maximum measurement error for the axial strain is 0.112µε, and the maximum temperature compensation error is as low as 0.024°C in the dual-loop OEO, which is far less than that in the single-loop OEO. The enhanced Vernier effect not only improves the sensitivity, but also reduces the temperature compensation error.

Sensitivity enhanced strain and temperature measurements based on FBG and frequency chirp magnification.

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation

Intensity-Modulated Fiber Bragg Grating Sensor System Based on Radio-Frequency Signal Measurement

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement

Sensitivity-Improved Fiber Bragg Grating Temperature Sensor Based on Microwave-Photonic Enhanced Vernier Effect

Simultaneous Measurement of Temperature and Strain Based on Fiber Loop Mirror Combined with Fiber Bragg Grating

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

ALLOMETRIC EXPONENTS SUPPORT A 3/4-POWER SCALING LAW

High-order fiber Bragg grating fabricated by femtosecond laser pulses for high-sensitivity temperature and strain sensing

Sensitivity-Tunable FBG Interrogation System Utilizing a Mechanically Induced Long Period Fiber Grating

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method

High sensitivity fiber optic temperature sensor based on CTFBG-FPI and vernier effect

Temperature-Insensitive Fiber Bragg Grating Sensing System for Curvature Measurement Based on Optoelectronic Oscillator With the Enhanced Vernier Effect

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

High-precision temperature-compensated fiber Bragg grating axial strain sensing system based on a dual-loop optoelectronic oscillator with the enhanced Vernier effect

Highly Sensitive Optoelectronic Oscillator-Based FBG Sensor via Coarse Sampling and Vernier Effect