Abstract:Fiber-optic temperature sensors have gained much attention owing to their intrinsic features of light weight, immunity to electromagnetic interference, and capability for distributed measurement. Especially, temperature sensors based on Fabry-Perot interferometers (FPIs) are attractive owing to their advantages of compact size and convenient reflection measurement. However, due to the low thermal expansion or/and thermo-optic coefficient of fiber, the temperature sensitivities of these sensors are normally low (similar to 10 pm/degrees C or even lower). In order to improve the temperature sensitivity, a device with dual cascaded FPIs is proposed and demonstrated in this paper, which works on vernier effect and exhibits a much higher temperature sensitivity. The device is fabricated by splicing a short segment of large mode area (LMA) fiber to a short segment of capillary tube fused with a section of single-mode fiber to form an extrinsic Fabry-Perot interferometer with a glass cavity cascaded to an intrinsic FPI with a narrow air cavity. By setting the lengths of capillary tube and LMA fiber to allow similar free spectral ranges to be obtained, and superimposing of the reflection spectra of the two FPIs, the vernier effect can be generated. Firstly, the principle of temperature sensing based on vernier effect of this device is analyzed and simulated theoretically, and it is found that the temperature sensitivity can be improved significantly by using vernier effect compared with that of a single FPI with an air-cavity or glass cavity by directly tracing resonant dips/peaks. Then, the temperature responses of the FPI with single air-cavity and dual cascaded cavities are measured, respectively. Experimental results match well with the theoretical analysis carried out. The temperature sensitivity of the proposed sensor is improved greatly from 0.71 pm/degrees C for a single FPI sensor with an air-cavity to 179.30 pm/degrees C by employing the vernier effect. Additionally, the sensor exhibits good repeatability in a temperature range of 100-500. C. The proposed sensor has the advantages of compact size ( < 1 mm in dimension) and high sensitivity, which makes it promising for temperature sensing in a variety of industries, such as food inspection, pharmacy, oil/gas exploration, environment, and high-voltage power systems.

High sensitivity fiber optic temperature sensor based on CTFBG-FPI and vernier effect

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Sensitivity-enhanced temperature sensor with fiber optic Fabry-Perot interferometer based on vernier effect

Ultrasensitive Temperature Sensor with Cascaded Fiber Optic Fabry–Perot Interferometers Based on Vernier Effect

High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

Fiber Optic Temperature Sensor With Online Controllable Sensitivity Based on Vernier Effect

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

High-sensitivity fiber temperature and pressure sensor based on fabry-perot interferometry and Vernier effect

Highly Sensitive Temperature Sensor Based on Vernier Effect Using a Sturdy Double-cavity Fiber Fabry-Perot Interferometer

High-sensitivity fiber optic temperature sensor based on enhanced vernier effect

High-sensitivity Fabry-Perot Interferometer Temperature Sensor Probe Based on Liquid Crystal and the Vernier Effect.

Ultrasensitive Temperature Sensor with Vernier-effect Improved Fiber Michelson Interferometer.

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Fiber temperature sensor based on Fabry-Pérot cavity generating optical Vernier effect

Cavity-length controllable Fabry–Perot interferometer based on Vernier effect

Sensitivity-enhanced Temperature Sensor with Parallel Dual Fabry-Perot Interferometers Structure Based on Harmonic Vernier Effect

Ultrahigh-Sensitivity Temperature Sensor Based on In-Fiber Fabry-Perot Interferometer

A novel multicore fiber temperature sensor based on Fabry-Perot structure

Highly sensitive temperature sensing probe based on two cascaded Fabry–Perot interferometers and Vernier effect

Simplified Hollow-Core Fiber-Based Fabry–Perot Interferometer With Modified Vernier Effect for Highly Sensitive High-Temperature Measurement