Abstract:An optical fiber sensor for the simultaneous measurement of microdisplacement and temperature based on balloon-shaped single-mode fibers cascaded with a fiber Bragg grating with two core-offset joints is proposed. The interference between the core mode and cladding mode is caused by the stimulation of the cladding mode by the core-offset joints’ structure. The cladding of the core has a distinct refractive index, which causes optical path differences and interference. The balloon-shaped structure realizes mode selection by bending. As the displacement increases, the radius of the balloon-shaped interferometer changes, resulting in a change in the interference fringes of the interferometer, while the Bragg wavelength of the fiber grating remains unchanged. Temperature changes will cause the interference fringes of the interferometer and the Bragg wavelength of the fiber grating to shift. The proposed optical fiber sensor allows for the simultaneous measurement of microdisplacement and temperature. The results of the experiment indicate that the sensitivity of the interferometer to microdisplacement is 0.306 nm/μm in the sensing range of 0 to 200 μm and that the temperature sensitivity is 0.165 nm/°C, respectively. The proposed curvature sensor has the advantages of a compact structure, extensive spectrum of dynamic measurement, high sensitivity, and simple preparation, and has a wide range of potential applications in the fields of structural safety monitoring, aviation industry, and resource exploration.

Simultaneous displacement, temperature and strain sensing system based on fiber macro-bend loss and edge filter

Simultaneous Measurement of Displacement and Temperature Based on Two Cascaded Balloon-Like Bent Fibre Structures

Multimode-interference-effect-based all-fiber displacement sensing system for an orthopedic Ilizarov apparatus device.

A Temperature-Insensitive Multipoint Displacement Sensing System Based on Fiber Macro-bending Loss

Simultaneous Measurement of Displacement and Temperature Based on a Balloon-Shaped Bent SMF Structure Incorporating an LPG

Highly Sensitive Displacement Sensor Based on Composite Interference Established Within a Balloon-Shaped Bent Multimode Fiber Structure.

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Simultaneous measurement of dynamic displacement and strain in a single fiber using coarse wavelength-division multiplexing and fiber Bragg-grating filter-based sensing system

Multi-parameters SMS optical fiber sensing by employing SCBSS signal processing technique

Simultaneous temperature and strain sensing using few-mode fiber in a single-ended BOTDA system

An OTDR and Gratings Assisted Multifunctional Fiber Sensing System

Simultaneous Measurement of Temperature and Strain Based on Fiber Loop Mirror Combined with Fiber Bragg Grating

Research on the Temperature Compensation of Optical Fiber Displacement Sensor Based on Multisensor Data Fusion.

Temperature and strain simultaneous sensing measurement based on an all-fiber Mach-Zehnder interferometer and fiber Bragg grating

Multiparameter sensor based on micro/nano-structured optical fiber and composites

Simultaneous strain and temperature measurement by cascading few-mode fiber and single-mode fiber long-period fiber gratings

Simultaneous Measurement of Microdisplacement and Temperature Based on Balloon-Shaped Structure

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Temperature and Strain Discrimination in BOTDA Fiber Sensor by Utilizing Dispersion Compensating Fiber

Modulated Pulses Based High Spatial Resolution Distributed Fiber System for Multi-Parameter Sensing