Abstract:Permeating behaviour is one of the most important factors of porous ceramics used for gas/liquid filters or membrane/catalysis supporters. Insufficient research has reported on the effect of raw particle size on permeating behaviour and the relationship between particle size and pore size of fabricated porous ceramics. In this work, porous SiC ceramics were fabricated with raw SiC particles of different grit designations and the effect of particle size on the permeating behaviour and equivalent pore size of the resulting porous ceramics were investigated. Due to oxidation of the SiC particles during the firing process, resulting materials with finer raw particles exhibited higher mass gain and lower bulk and true density. When the grit designation changed from 2000# to 120#, the strength of the resulting materials declined, and the Darcy permeability k1 increased from 6.65 × 10−15 to 4.85 × 10−13 m2. The ratio of the hydraulic equivalent diameter of pores to raw particle size in the resulting materials decreased from 0.25 to 0.11, indicating that the hydraulic equivalent pore size did not increase proportionally with the particle size increase. Further measures should be employed to enlarge pore size in porous ceramics to enhance its permeability.

Corrosion Behavior Of Porous Silicon Nitride And Sialon Ceramics

Corrosion Behaviour of Porous SiAlON Ceramics

Porous silicon nitride and SiAlON ceramics: Fabrication and characterization

Porosity and Oxide Layer Dependence of Thermal Shock Behavior of Porous Silicon Nitride Ceramics

Corrosion and Oxidation of Silicon Carbide Based on a Nitride Binder in an Aluminum Electrolyzer Side Lining

Mechanical, Dielectric Properties and Thermal Shock Resistance of Porous Silicon Oxynitride Ceramics by Gas Pressure Sintering

Internal Friction Behavior Of Sic Ceramics Subjected To Water Vapor Corrosion

Effects of pore diameters on phase, oxidation resistance, and thermal shock resistance of the porous Si2N2O ceramics

Fracture Behavior of Porous Si3n4 Ceramics with Random and Aligned Microstructure

Progress in Preparation and Properties of Porous Silicon Nitride Ceramics

Corrosion Resistance Properties of Porous Alumina–Mullite Ceramic Membrane Supports

Corrosion Resistance Characterization of Porous Alumina Membrane Supports

Effect of Si<sub>3</sub>N<sub>4</sub> Nanowires on the Mechanical Properties and Dielectric Constant of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Microstructure and Mechanical Properties of SiAlON Ceramics with Porous Structure

Research Progress of Porous Silicon Nitride Ceramics

Fabrication and Mechanical Properties of Porous Silicon Nitride Ceramics from Low-Purity Powder

Porous Silicon Nitride Ceramics Prepared by Reduction-Nitridation of Silica

Effect of Residual Phase and Grain Size on Corrosion Resistance of Sic Ceramics in Mixed Hf-Hno3 Acid Solution

Effect of Sintering Additives on Microstructure and Mechanical Properties of Porous Silicon Nitride Ceramics

Permeating behaviour of porous SiC ceramics fabricated with different SiC particle sizes

The corrosion resistance mechanisms of the cr-coated SiC in molten Na2SO4 salt: Strengthened boundaries and protective scales