Construction and Technological Tests of the Full-Scale Storage and Delivery Demo-System (sds) in Deuterium-Tritium Internal Fuel Circulation for Magnetic Constrained Nuclear Fusion Reactor
Xu Huang,Huaqin Kou,Jinchun Bao,Renjin Xiong,Jun Chen,Degao Wang,Yang Yu,Rongxin Ye,Changan Chen,Wenhua Luo
DOI: https://doi.org/10.2139/ssrn.4357619
2023-01-01
Abstract:Deuterium-Tritium (D-T) storage and delivery system (SDS) is a crucial part in the tritium plant of nuclear fusion, and its foremost function is to rapidly provide D-T fuel for fusion reactor and to store D-T fuel from other sub-systems. However, the integrated SDS matching the actual engineering scale has not been reported yet, and the technological parameters have no way to acquire and verify. Herein, we built a full-scale SDS demo-system to predictably meet the requirements of future nuclear fusion reactor (200-1500 MW). In the SDS, self-developed double-thin wall storage bed with a secondary containment structure, rapid heat/mass transfer, and in-situ precise metering technology were integrated. Highly sophisticated distributed control system (DCS) and safety interlocking system (SIS) are introduced to monitor, control and interlock protection of the SDS demo-system. Basically, leak rate < 10-9 pa.m3/s, pressure resistance > 0.6 Mpa, vacuum degree < 5 Pa, operated temperature > 500 ℃, and automated operation have been achieved. Large scale storage and delivery experiments show that the rates can reach to 5.09 m3/h (141.4 Pa.m3/s, 39.5 min) for storage and 7.24 m3/h (201.1 Pa.m3/s, 41.5 min) for delivery respectively. In addition, the SDS demo-system has also been integrated with TEP, ISS, and ANS to establish a steady-state operation (2.4 m3/h, >500 MW) and further evaluate the engineering feasibility of the whole D-T internal fuel circulation. Construction and technological test of the SDS demo-system is a landmark event for the development of tritium factory of the magnetic constrained nuclear fusion reactor.