Abstract:During the maintenance period of a future fusion reactor power plant, called DEMOnstration Power Plant (DEMO), remotely handled casks are required to confine and handle DEMO in-vessel components during their transportation between the reactor and the active maintenance facility. In order to limit the dispersion of activated dust, a Contamination Control Door (CCD) is designed to be placed at an interface between separable containments (e.g., vacuum vessels and casks) to inhibit the release of contamination at the interface between them. The remotely operated CCD—technically, a double lidded door system—consists of two separable doors (the cask door and port door) and three different locking mechanisms: (i) between the cask door and cask, (ii) between the cask door and port door and (iii) between the port door and port. The locking mechanisms are selected and assessed according to different criteria, and the structure of the CCD is optimized using an Abaqus Topology Optimization Module. Due to the elastic properties of the CCD, deflections will occur during the lifting procedure, which may lead to malfunctions of the CCD. A test rig is developed to investigate the performance of high-risk components in the CCD in the case of deflections and also malpositioning. Misalignment can be induced along three axes and three angles intentionally to test the single components and items. The aim is to identify a possible range of operating in the case of misalignments. It is expected that the proposed CCD design should be able to operate appropriately in the case of ±3 mm translational misalignments and ±1° rotational misalignments.

Design of Control System on the Bidirectional Sealing Door for TECA.

Design And Analysis Of A Double Seal Door For The Tokamak Equipment Cask(Teca)

Double fuzzy control system for tea carding machine

Study on the key technologies of the Transfer Equipment Cask for Tokamak Equator Port Plug

Design on the Control System of Automatic Water Door

Research on the Tokamak Equipment CAsk (TECA) for Remote Handling in Experimental Advanced Superconducting Tokamak (EAST).

Concept of Contamination Control Door for DEMO and Proof of Principle Design

The Design of Intelligent Controller for Engineering Equipment

Towards Component-Based Control System Engineering with IEC61499

Control System Design of Automatic Door Based on PLC

Design of Control System for Heavy Pressure Horizontal Scroll Decanter Centrifuge in PTA Unit

The realization of signal interlock protection in EAST Cryogenic System with DCS

Design of PLC Control System for Automatic Door

A Type of Parallel Lifting Mechanism for TECA Transfer Cask

The Design and Realization of Control Subsystem for Luggage DR-CT Inspection System

PLC Control System Design for Automated Storage and Retrieval System

Research on Localization and Alignment Technology for Transfer Cask

System Safety Design of an AMT Control Unit

DTC control system for high-rise building elevator door motor

Design of control system of Multifunctional Loading and Unloading Equipment

EAST cryogenic supervisory and control system based on Delta-V DCS