Abstract:The China Fusion Engineering Test Reactor (CFETR) is a new tokamak device whose magnet system includes toroidal field, central solenoid (CS) and poloidal field coils. The main goal is to build a fusion engineering tokamak reactor with about 1 GW fusion power and self-sufficiency by blanket. In order to reach this high performance, the magnet field target is 15 T. However, the huge electromagnetic load caused by high field and current is a threat for conductor degradation under cycling. The conductor with a short-twist-pitch (STP) design has large stiffness, which enables a significant performance improvement in view of load and thermal cycling. But the conductor with STP design has a remarkable disadvantage: it can easily cause severe strand indentation during cabling. The indentation can reduce the strand performance, especially under high load cycling. In order to overcome this disadvantage, a new design is proposed. The main characteristic of this new design is an updated layout in the triplet. The triplet is made of two Nb3Sn strands and one soft copper strand. The twist pitch of the two Nb3Sn strands is large and cabled first. The copper strand is then wound around the two superconducting strands (CWS) with a shorter twist pitch. The following cable stages layout and twist pitches are similar to the ITER CS conductor with STP design. One short conductor sample with a similar scale to the ITER CS was manufactured and tested with the Twente Cable Press to investigate the mechanical properties, AC loss and internal inspection by destructive examination. The results are compared to the STP conductor (ITER CS and CFETR CSMC) tests. The results show that the new conductor design has similar stiffness, but much lower strand indentation than the STP design. The new design shows potential for application in future fusion reactors.

Concept design of automatic connector for maintenance cask of EU-DEMO and CFETR

Overview of in-bore pipe cutting and welding tools for the maintenance of CFETR and EU-DEMO

Design and Development of Turn Insulation Automatic Wrapping System for CRAFT TF

Development of Integrated Floating Detachable Connector for On-Orbit Service

Optimization Of Cfetr Csmc Cabling Based On Numerical Modeling And Experiments

Design and Strength Analysis of the Lifting Process for CFETR TF Coil Manufacturing

Conceptual Design of 15 Tesla Conductor Test Facility for Future Fusion Reactor

Concept of Contamination Control Door for DEMO and Proof of Principle Design

Progress in the conceptual design of the CFETR toroidal field coil with rectangular conductors

Engineering design of the CFETR machine

Development of CFETR Integration Design Platform: Modular Structure

A new enclosed method for transverse mechanical testing on CICC conductors

Concept Design on RH Maintenance of CFETR Tokamak Reactor

Progress of Concept Design for CFETR Diagnostic System

EU-DEMO vacuum vessel port closure plate fastening developments

Progress of the CFETR Design

Development of Vacuum Vessel Design and Analysis Module for CFETR Integration Design Platform

New Design of Cable-in-conduit Conductor for Application in Future Fusion Reactors

Replacement strategy of the EU-DEMO and CFETR breeding blanket pipes

Engineering Conceptual Design of CFETR Divertor

A face-contact connector for modularized floating structures