Abstract:Robust manufacturing technology for sodium-cooled fast reactor (SFR) components required development of various innovative welding technologies backed by thorough research. Construction of the 500 MWe Prototype Fast Breeder Reactor at Kalpakkam was preceded by extensive technology development which included planning and implementation of R&D on welding consumables and procedures and also technologies for fabrication of components with stringent specifications. To take on the challenges and establish robust manufacturing techniques for fabrication of all the structural components of the SFR, a close interaction among design, materials and non-destructive evaluation engineers, materials and welding consumable manufactures, and the fabrication industries had to be facilitated. Fabrication of SFR reactor vessels, steam generators, fuel sub-assemblies, etc., requires extensive welding. Activated tungsten inert gas (A-TIG) welding process together with activated flux was developed in-house. The same was successfully implemented on various SFR components. Online monitoring and control during welding was developed based on a computational intelligence methodology and deployed for obtaining near defect-free welded components. Plasma transferred arc welding process was used for deposition of a nickel-base alloy for hardfacing of SFR components, with improved resistance to high-temperature wear, especially galling of mating surfaces in liquid sodium environment. In order to substantially reduce carbon footprint, India has initiated a national mission programme for design, development and establishment of a 800 MWe Advanced Ultra-supercritical (AUSC) power plant having steam parameters of 710ºC/ 720ºC/ 310 bar. Success of this program heavily banks on development of materials and fabrication technologies that can sustain the extreme in-service conditions. Two important India-specific high-temperature tube materials were developed for the purpose, namely, 304HCu austenitic stainless steel (304HCu SS) and modified Alloy 617M. In addition, large cylindrical forgings of Alloy 617M of up to 800 mm diameter for turbine rotors were indigenously developed. R&D activities included development of welding consumables and welding procedure for TIG welding of tubes, including the 304HCu SS/Alloy 617M dissimilar joint. Based on the tensile and creep tests results, welding consumables for joining the tubes and their dissimilar joints were also finalized. Technology development also included dissimilar metal welding between Alloy 617M and 10Cr-steel forgings for turbine rotors. The dissimilar metal weld between 400 mm Alloy 617M and 10Cr-steel were produced by directly welding the two forgings using Alloy 617 filler wire using narrow-gap TIG welding process. Similarly, procedure for NG welding of superheater headers was also demonstrated. This paper discusses the Indian efforts toward development and deployment of welding technologies for fabrication of components for the Indian SFR-based nuclear power plant and the AUSC thermal power plant.

Overview of in-bore pipe cutting and welding tools for the maintenance of CFETR and EU-DEMO

Replacement strategy of the EU-DEMO and CFETR breeding blanket pipes

A review of pipe cutting, welding, and NDE technologies for use in fusion devices

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

A Preliminary Work on the Preparation for Neutron Irradiation of Advanced Fusion Materials Using Small Samples in China

Concept design of automatic connector for maintenance cask of EU-DEMO and CFETR

The Use of Time-of-Flight Neutron Bragg Edge Imaging to Measure the Residual Strains in W/Cu Dissimilar Joints for Fusion Reactors

Assembly of ITER blanket module to vacuum vessel experimental investigations

Pre-conceptual Design Assessment of DEMO Remote Maintenance

Induction brazing of DEMO's large bore cooling pipes

Engineering design of the CFETR machine

Development of a Steam Generator Mock-Up for EU DEMO Fusion Reactor: Conceptual Design and Code Assessment

Demountable Toroidal Fusion Core Facility for Toroidal Physics Optimization and Fusion Engineering Research

Assessment of a bolted-flange connection for ITER Test Blanket Module

Development and Deployment of Welding Technologies for the Indian Sodium-Cooled Fast Reactor and Advanced Ultra-supercritical Thermal Power Programmes

Thermal–hydraulic study of the Primary Heat Transport System of the EU-DEMO Divertor Plasma Facing Components

Conceptual Design of a Modular EC Heating System for EU-DEMO

Design and analysis of the Agile Robot Transporter for ITER in-vessel maintenance

Conceptual design of DEMO breeding blanket in-vessel toroidal transporter

Mock-ups fabrication by HRP technology with advanced W-alloy monoblocks for DEMO divertor target

High Heat Flux Tests in Support of the 3-D Computational Modeling of Melting for the EU-DEMO First Wall Limiters