Abstract:The EU-DEMOnstration fusion power plant (DEMO) first wall protection strategy relies on limiter components to face both normal and off-normal plasma transient events. The heat loads during these events are likely to damage the breeding blanket’s first wall otherwise. Since W is the preferred plasma-facing material for EU-DEMO, the plasma-facing component design of the limiters follows considerations based on heat transfer in solids undergoing phase transition. The understanding of this problem has paved the way for a 1-D thermal modeling in MATLAB Thermal Analysis foR Tracking InterFaces under meLting&vaporizaTion-induced plasma Transient Events (TARTIFL&TTE), which has then been improved and extended to 3-D geometries within a Multiphysics environment. Hence, the 3-D TARTIFL&TTE implementation in COMSOL Multiphysics. Although the validation has already started against some data available in the literature and described in the companion paper, dedicated experiments are performed in the Garching LArge DIvertor Sample Test Facility (GLADIS) for melting studies. Carried out as a joint activity between EUROfusion and U.K. Atomic Energy Authority (UKAEA), the aim of these experiments is generating a traceable and controlled experimental database in support of heat transfer studies in solid components undergoing phase transition. The data are here used in support of the 3-D TARTIFL&TTE validation benchmark. To broaden the database, three different materials are chosen, i.e., TZM, W, and SS-316 grade. The requirements defining the experiments comply with the hypotheses behind 3-D TARTIFL&TTE, for it to be able to reproduce the experiments. Therefore, a uniform heat flux on the loaded surface is provided by the H neutral beam on the footprint, and loading time and heat flux magnitude are chosen such that only melting is reached. This allows the liquid metal to stay in place once formed. No attempts to reach vaporization are made, since the vertical position of the target promotes the molten layer sliding under gravity effects. Measured and modeled results (temperature, absorbed energy, and melt layer depth) show good agreement during the melting phase. As a stepwise benchmark, validation will be also sought under vaporization events. Future work is focused on addressing this last point.

Mock-ups fabrication by HRP technology with advanced W-alloy monoblocks for DEMO divertor target

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Manufacturing and testing of ITER FW CuCrZr/316L(N)-IG explosive Bi-metallic plates

Manufacturing and Testing of W/Cu Mono-Block Small Scale Mock-Up for EAST by HIP and HRP Technologies

China’s Technological Achievements on ITER Enhanced Heat Flux First Wall in the Pre-Pa Qualification

Development of potassium doped tungsten plate for fusion reactor applications

Thermal fatigue failure behavior on Be/Cu joint of ITER first wall after enhanced heat flux test

Development of irradiation tolerant tungsten alloys for high temperature nuclear applications

Comparative study of ITER conform tungsten grades exposed to high heat flux and neutron irradiation damage

Study of W/Cu Flat-Type Mock-Ups with Novel Hypervapotron Cooling Structure for CFETR Divertor

Thermal strain test and analysis of the W-ZrC mono-block mock-up

Multi-scale lumped modeling of micro-channels cooling structure for W7-X divertor unit target module

Thermal and structural analysis of JT-60SA actively cooled divertor target submitted to high heat flux

A comprehensive screening of plasma-facing materials for nuclear fusion

Advanced Self-Passivating Alloys for an Application under Extreme Conditions

Post examination of tungsten monoblocks subjected to high heat flux tests of ITER full-tungsten divertor qualification program

The Impact of Refractory Material Properties on the Helium Cooled Divertor Design

Overview of R&D on Plasma-Facing Materials and Components in China

High Heat Flux Tests in Support of the 3-D Computational Modeling of Melting for the EU-DEMO First Wall Limiters