Abstract:Modular steel buildings (MSBs) have achieved considerable popularity in multi-to-high rise constructions due to the favorable mechanical characteristic, eco-friendliness, cost-effectiveness, and enhanced construction efficiency. As the critical part of MSBs, the inter-module connection has an important influence on determining the seismic performance of MSBs. This study presented an experimental-numerical investigation on an innovative fully prefabricated liftable connection (FPLC) for MSBs. To study the seismic performance of the FPLC, quasi-static tests were conducted on four full-scale specimens. The seismic behavior of the specimens, including failure mode, hysteretic response, strength and stiffness degradation, deformation characteristic, etc. was evaluated and compared in detail. The effect of the section of the twin-beams, the dog-bone weakening of the beam and the connecting method between the corner fitting and twin-beams on the seismic behavior of the FPLC was revealed. Moreover, the feasibility for seismic application of the FPLC was evaluated according to Chinese code GB 50011-2010 and Eurocode 3 Part 1-8. The results indicated that the proposed FPLC met the limit of elastic and elastic-plastic inter-story drift ratios required by GB 50011-2010. According to Eurocode 3 Part 1-8, the FPLC with welded beams should be classified as "semi-rigid" connections, while the FPLC, whose beams were connected to the column walls by the steel angles and bolts, was classified as a "pinned" connection. Then, a refined finite element model (FEM) was developed and verified by the test results. Furthermore, the verified FEM was utilized to analyze the distribution of the equivalent plastic strain, the stress variation path, and the yielding area of the twin-beams to further reveal the energy dissipation and damage mechanism of the FPLC. Finally, a simplified FEM was established and the comparison with the test results proved its reliability and efficiency. The present study will contribute to provide a comprehensive understanding on seismic performance and design of the inter-module connection for MSBs.

A face-contact connector for modularized floating structures

A Novel Designed Load Adaptive Noncontact Wet-Mate Connector for Subsea Devices

Experimental Study on the Hydrodynamic Performance of a Flexible Connected Double-Module Floating Structure

Connector Configuration Effect on the Dynamic Characteristics of Multi-Modular Floating Structure

Behaviour and design of prefabricated connections under combined bending and compression for free-form grid structures

Electricity-structure-fluid Coupled Modelling and Experiment of Underwater Flexible Structure with Partially Distributed Macro Fiber Composites

Tensile Behavior of Novel Column-to-column Connection for Modular Steel Construction Using High-Strength Bolts

Hydroelastic analysis and structural design of a modular floating structure applying ultra-high performance fiber-reinforced concrete

Optimization of Connection Parameters of Self-Adaptive Modular Floating Wind Farms

Novel coupled modular steel structure and seismic tests on high-performance interconnection

A discrete-module-finite-element hydroelasticity method in analyzing dynamic response of floating flexible structures

Hydrodynamic analysis of floating photovoltaic system constrained with rigid connectors

Numerical simulation of weld fracture using cohesive interface for novel inter-module connections

Design Scheme and Structure Analysis of Dongwuyang Submerged Floating Tunnel

Seismic behavior of a novel liftable connection for modular steel buildings: Experimental and numerical studies

Fatigue damage risk assessment on connections of floating pontoon arrays

The flexural mechanical response of a novel plug-in self-locking inter-module connection for modular steel buildings

Design and simulation of innovative foam-filled Lattice Composite Bumper System for bridge protection in ship collisions

Development of an innovative module-to-core wall connection for steel-framed modular high-rise buildings

Design Method of a Novel Interface Connection Device for Multiscale Test Model Considering Multiparametric Similarity of Internal Forces

Hydrodynamic Responses of a Novel Modular Floating Structure System With Multi-Direction Expansion