Abstract:Modular steel buildings show high assembly degree and fast installation speed. The inter-module connection (IMC) is one of the key technologies that restrict the robustness of modular steel buildings. An innovative IMC with a cross-shaped plug-in connector is proposed, and the connection consists of end plates of columns, the cross-shaped plug-in connector, bolts, cover plates, and one-side bolts. The proposed IMC is easily constructed, and the cross-shaped plug-in connector can improve the shear resistance of the core area. The mechanical model of the proposed IMC is presented, and the panel zone volume modified factor and initial rotational stiffness modified factor are proposed for calculating the shear capacity of the panel zone and the initial rotational stiffness. Numerical simulation was conducted considering the influences of axial compression ratios, sections of beams and columns, and the thickness of the tenon plate of the connector. The bearing capacity of the proposed IMC was analyzed, and the values of the two factors mentioned above were calculated, and their regression formulas are presented. The results show that the sections of beams and columns and the axial compression ratios show great influences on the bearing capacity of the proposed IMC, while the thickness of the tenon of the cross-shaped plug-in connector shows almost no effect. In addition, the sections of beams and columns show great influences on the shear capacity of the panel zone, as well as the initial rotational stiffness of the proposed IMC, while the thickness of the tenon of the cross-shaped plug-in connector and the axial compression ratios show little effect and almost no effect, respectively. Furthermore, the bending moment limit of the beam end of the proposed IMC is suggested to be 0.6 times the resistance bending moment, and the proposed IMC is considered to be a rigid connection or inclined to a rigid connection The proposed IMC has good mechanical performance, and design recommendations are presented.

Connector Configuration Effect on the Dynamic Characteristics of Multi-Modular Floating Structure

Experimental Study on the Hydrodynamic Performance of a Flexible Connected Double-Module Floating Structure

A face-contact connector for modularized floating structures

An Approach for Connector Arrangement of Very Large Floating Structures

Experimental and Numerical Investigation of Influences of Connector Stiffness and Damping on Dynamics of a Multimodule VLFS

Experimental and numerical study on motion instability of modular floating structures

Nonlinear Dynamic Characteristics of a Multi-Module Floating Airport with Rigid-Flexible Connections

Experimental and Numerical Study on Dynamic Responses of a Tlp-Type Modular Floating Structure System

Effect of Inter-Module Connection Properties on Structural Sway of High-Rise Modular Buildings

Novel coupled modular steel structure and seismic tests on high-performance interconnection

Hydrodynamic analysis of floating photovoltaic system constrained with rigid connectors

An Optimization Method for Stiffness Configuration of Flexible Connectors for Multi-Modular Floating Systems

Investigation on Effects of Mooring Line Fractures and Connector Failures for A Hybrid Modular Floating Structure System

Characteristics of Floating Arrays from Aligned to Staggered Patterns

A Study on Mechanical Performance of an Innovative Modular Steel Building Connection with Cross-Shaped Plug-In Connector

Coupling Effects for Cell-Truss Spar Platform: Comparison of Frequency- and Time-Domain Analyses with Model Tests

Hydrodynamic Analysis of a Modular Floating Structure with Tension-Leg Platforms and Wave Energy Converters

Hydroelastic Analysis of Flexible Floating Interconnected Structures

Experimental Study of an Innovative Modular Steel Building Connection

Experimental Study on Interior Connections in Modular Steel Buildings

Numerical Study on Dynamic Analysis of a Nine-Module Floating Aquaculture Platform under Irregular Waves