Dynamic Fea And Simulation For A Series Of Blast-Resist-Door

Xinzheng Lü,JianJing Jiang

2002-01-01

Abstract:A series of blast-resist-door were used widely. In order to know the behavior of the doors under blast load and verify the safety of the doors, dynamic finite element analysis and simulation are carried out with advanced FEA software, ANSYS/LS-DYNA and SAP. Contact surfaces are introduced to simulate the relation between the door leaf and doorframe, as well as the relation between the door hinges and bearings. Altogether 24 different load cases are analyzed to simulate various load conditions. For example, the difference between conventional explosive blast load and nuclear blast load are compared. Different doorframes are also discussed. And blasts that are much larger than the designed ones are analyzed to obtain the damage process of the doors and to get the safety margin to the original design. From the numerical computations, some special results are obtained, which are difficult from static analysis. For instant the damage process shows that even if there is very large plastic strain in the door, the door may still be safe. So traditional allowable stress design method may be uneconomical. However, the numerical result also shows that the most dangerous situation for the door hinges does not consisted with designer's imagine, which means the original hinge design may be unsafe. Following conclusions are obtained from the whole simulation: (1) traditional static or quasi-static analysis has some limits in these special structures; (2) dynamic FEA is a cheap and convenient method for these structures; (3) contact analysis is important for dynamic simulation.