Abstract:In this work, a new micromechanical constitutive model is constructed for high-temperature shape memory alloys. Different from the classical constitutive models, the microstructural patterns, heterogeneities of stress and strain fields at the microscopic scale are addressed. In the proposed model, three different inelastic deformation mechanisms, i.e., reversible martensitic transformation, irreversible transformation-induced plasticity, viscoplasticity, as well as their complex interactions, are considered. In addition to the well-known austenite and martensite phases, a new austenite-martensite interface phase is introduced to address the high local stress induced by the martensitic transformation. The modified Mori-Tanaka's homogenization scheme and Hill's interfacial operator are employed to determine the non-uniform stress fields of the three phases. To satisfy the thermodynamic compatibility of the proposed model, the driving forces and evolution equations of the three inelastic deformation mechanisms are derived based on the constructed Helmholtz free energy and the fundamental laws of irreversible thermodynamics. Inheritances of the plastic deformation induced by moving austenite-martensite (A-M) interface during repeated martensitic transformation and its reverse are incorporated. Temperature evolution caused by internal heat production and heat exchange with the ambient medium is also addressed. To validate the capability of the new constructed model, the predicted results of creep behavior and stress-assisted two-way shape memory effect of NiTiPd high-temperature shape memory alloys are compared with the experimental ones. The proposed model provides a theoretical tool for simultaneously analyzing the deformation behaviors at the macroscopic scale and underlying mechanisms at the microscopic scale.

Positron-Annihilation Study of Defects in Thermoelastic Martensite-Transformation of Cu-Base Shape Memory Alloy

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

Re-examination of martensitic stabilization in Cu-based shape memory alloys Part II. Key factors determining occurrence of martensitic stabilization in Cu-based alloys

In Situ Observation of Thermoelastic Martensitic Transformation of Cu-Al-Mn Cryogenic Shape Memory Alloy with Compressive Stress

Study of the stabilization of ordered austenite β1 in Cu79Al19X2 (X = Be or Mn) alloys

Microstructure, Martensitic Transformation and Superelasticity of Ti49.6Ni45.1Cu5Cr0.3 Shape Memory Alloy

A Study of Structure of Metastable Cu–Zn Alloys with Shape Memory Effect

Re-examination of martensitic stabilization in Cu-based shape memory alloys Part I. Identification of occurrence stage and degree of martensitic stabilization in CuZnAl alloys

Study on Aging Effect and Mechanism of Cu-11.1Al-6.5Mn-1.6Zn-0.1Zr Shape Memory Alloy

Structural and Phase Transformations and Physical and Mechanical Properties of Cu-Al-Ni Shape Memory Alloys Subjected to Severe Plastic Deformation and Annealing

Quantitative analysis of microstructure evolution in shape memory alloys during martensitic transformation

Microstructure, Martensitic Transformation And Superelasticity Of T1(49) (6)N1(45 1)Cu(5)Cr(0 3) Shape Memory Alloy

Microstructure , martensitic transformation and superelasticity of Ti 49 . 6 Ni 45 . 1 Cu 5 Cr 0 . 3 shape memory alloy

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Effect of Cu content on martensitic transformation and shape memory behavior in Ti31.5Hf15Zr5Ni48.5−xCux alloys

Failure mechanism of reverse shape memory effect in a Cu-base alloy

Temperature Memory Effect in CuAlNi Single Crystalline and CuZnAl Polycrystalline Shape Memory Alloys

A micromechanical constitutive model of high-temperature shape memory alloys

Effect of Aging on Martensitic Transformation and Superelasticity of TiNiCr Shape Memory Alloy

A Study of a Cryogenic CuAlMn Shape Memory Alloy

CONTINUUM THERMODYNAMICAL STUDIES ON THE THERMAL-ELASTIC MARTENSITIC TRANSFORMATION