Abstract:The present study investigated the microstructure, phase transformation behavior, and functional characteristics of the multicomponent Ti–Ni–Cu–Al–V shape memory alloys with the different annealing treatments. The results indicated that the multicomponent Ti–Ni–Cu–Al–V alloy annealed at 673 K/5 min was primarily composed of the B2 parent phase and Ti2(Ni,Cu) type precipitates distributing along the grain boundaries. As the annealing temperature increased and the annealing time extended, the chemical composition of the matrix changed slightly due to the precipitation of the Ti2(Ni,Cu) phase. Consequently, the martensitic phase (B19) gradually appeared and the volume friction of the martensite phase gradually increased. The phase constituents of the present Ti–Ni–Cu–Al–V shape memory alloy evolved from a B2 austenite phase to a B19 martensite phase with the annealing temperature/time increasing. Additionally, as the annealing temperature and time increased, the grain size also increased. The increment in annealing temperature and the prolongation of annealing time resulted in an increase of martensitic transformation temperatures as a result of the comprehensive effect of chemical composition, grain size, defects’ density, etc. Both yield strength and fracture strength decreased, while the elongation significantly increased (reaching 28% at 1123 K/60 min) with the annealing temperature rising and annealing time prolonging. Under the successively applied prestrain to 8% condition, the recoverable strain decreased from 4.2% to 1.7% for the annealed Ti–Ni–Cu–Al–V shape memory alloy with the annealing temperature/time increasing.

Re-examination of martensitic stabilization in Cu-based shape memory alloys Part I. Identification of occurrence stage and degree of martensitic stabilization in CuZnAl alloys

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

Re-examination of martensitic stabilization in Cu-based shape memory alloys Part II. Key factors determining occurrence of martensitic stabilization in Cu-based alloys

Study of the stabilization of ordered austenite β1 in Cu79Al19X2 (X = Be or Mn) alloys

Quantitative analysis of microstructure evolution in shape memory alloys during martensitic transformation

In Situ Observation of Thermoelastic Martensitic Transformation of Cu-Al-Mn Cryogenic Shape Memory Alloy with Compressive Stress

Study of Stabilization of CuAlBe Alloy During Martensitic Transformation by Internal Friction

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Residual stress induced stabilization of martensite phase and its effect on the magneto-structural transition in Mn rich Ni-Mn-In/Ga magnetic shape memory alloys

Fe–Mn–Si–Cr–Ni Based Shape Memory Alloy: Thermal and Stress-Induced Martensite

A Study of Structure of Metastable Cu–Zn Alloys with Shape Memory Effect

Effect of aging on martensitic transformation behavior of Ti 48.8 Ni 50.8 V 0.4 alloy

Structural and Phase Transformations and Physical and Mechanical Properties of Cu-Al-Ni Shape Memory Alloys Subjected to Severe Plastic Deformation and Annealing

Phase field study of heat treatment and strengthening in maraging steels

Austenite Thermal Stabilization Through the Concentration of Manganese and Carbon in the 0.2c–5mn Steel

Effect of Cu content on martensitic transformation and shape memory behavior in Ti31.5Hf15Zr5Ni48.5−xCux alloys

Microstructure, Martensitic Transformation and Superelasticity of Ti49.6Ni45.1Cu5Cr0.3 Shape Memory Alloy

Electron irradiation-induced evolution of the martensitic transformation characteristics in a CuZnAl shape memory alloy

The evolution of microstructure, martensitic transformation and mechanical properties in Ti–V–Al-based shape memory alloys with changing annealing temperatures

Effect of aging on martensitic transformation behavior of Ti<sub>48.8</sub>Ni<sub>50.8</sub>V<sub>0.4</sub> alloy

Rate dependent damping of single crystal CuAlNi shape memory alloy