Abstract:The symmetrical optical waveguide structures are fabricated in Er3+-doped aluminosilicate glass using 800 nm femtosecond laser writing in kHz repetition frequency regime. The impact of writing parameters on the waveguide preparation with a 10× microscope objective in the longitudinal writing scheme was studied in detail. The experimental results show that, under a fixed pulse energy value of 20 μJ, the waveguides can be realized with the scan speed from 20 to 160 μm/s, and with a fixed scan speed value of 160 μm/s, the waveguide can be prepared under an inscription energy range of 5–30 μJ, indicating that the waveguide can be realized in a wide range of writing parameters. The near-field mode intensity image shows that the waveguide region possesses excellent light guiding properties. Based on the refractive index profile reconstruction method, the maximum refractive index increase in the waveguide region is estimated to be about 5.5 × 10–4. The lowest propagation loss of the waveguide was measured to be about 1.51 dB/cm by the waveguide side scattering method. The microfluorescence spectra show that the gain characteristics of the waveguide region are well maintained after laser processing. This work shows that the fabrication of embedded optical waveguides using ultrashort pulse laser in Er3+-doped aluminosilicate glass has strong feasibility and great potential to create active gain devices in the field of integrated photonics and all-optical communication.

High Quality Photonic Devices Directly Written in Gorilla Glass Using a Fs Laser

Glass Nanofibers for Micro- and Nano-Scale Photonic Devices

Optical loss measurements in femtosecond laser written waveguides in glass

3D waveguide element fabrication in Gorilla glass by an ultrafast laser

Laser-written integrated photonics in glass-ceramics Zerodur

Direct laser-writing of ferroelectric single-crystal waveguide architectures in glass for 3D integrated optics

Low-loss Photonic Device in Ge-Sb-S Chalcogenide Glass.

Effectively Writing Low Propagation and Bend Loss Waveguides in the Silica Glass by Using a Femtosecond Laser.

Ultrafast laser inscribed waveguides in tailored fluoride glasses: an enabling technology for mid-infrared integrated photonics devices

Low Bend Loss, High Index, Composite Morphology Ultra-fast Laser Written Waveguides for Photonic Integrated Circuits

Photonic Lattice-Like Waveguides in Glass Directly Written by Femtosecond Laser for On-Chip Mode Conversion

Low-loss optofluidic waveguides in fused silica enabled by spatially shaped femtosecond laser assisted etching combined with carbon dioxide laser irradiation

Study of Silicon-on-glass Waveguides

Optical Waveguide Writing Inside Foturan Glass with Femtosecond Laser Pulses

Femtosecond-laser-written Microstructured Waveguides in BK7 Glass

Demonstration of High-Performance, Sub-Micron Chalcogenide Glass Photonic Devices by Thermal Nanoimprint

High-power Continuous-Wave Optical Waveguiding in a Silica Micro/nanofibre.

Mode-tunable Low-Loss Waveguides in Glass for Visible Light Photonic Integrated Devices

Photonic Circuits Written by Femtosecond Laser in Glass: Improved Fabrication and Recent Progress in Photonic Devices

Integrated multimode optical waveguides in glass using laser induced deep etching

Direct Writing of Channel Optical Waveguides in Er 3+ -Doped Aluminosilicate Glass by Low Repetition Rate Femtosecond Laser