Abstract:This paper presents an overview of MOS transistor modeling for RF integrated circuit design. It starts with the description of a physical equivalent circuit that can easily be implemented as a SPICE subcircuit. The MOS transistor is divided into an intrinsic part, representing mainly the active part of the device, and an extrinsic part responsible for most of the parasitic elements. A complete charge-based model of the intrinsic part is presented. The main advantage of this new charge-based model is to provide a simple and coherent description of the dc, ac, nonquasi-static (NQS), and noise behavior of the intrinsic MOS that is valid in all regions of operation. It is based on the forward and reverse charges $q_f$ and $q_r$ defined as the mobile charge densities, evaluated at the source and at the drain. This intrinsic model also includes a new simplified NQS model that uses a bias and frequency normalization allowing one to describe the high-order frequency behavior with only two simple functions. The extrinsic model includes all the terminal access series resistances, and particularly the gate resistance, the overlap, and junction capacitances as well as a substrate network. The latter is required to account for the signal coupling occurring at RF from the drain to the source and the bulk, through the junction capacitances. The bias dependence of these components is discussed, mainly focusing on the overlap capacitances. The noise model is then presented, including the effect of the substrate resistances on the RF noise parameters. All the aspects of the model are validated for a 0.25-$\mu$m CMOS process. The simulation results of the $Y$-parameters, the transit frequency, the noise parameters, and the RF large-signal characteristics show an excellent agreement with the measured data.

Advanced MOSFET Modeling for RF IC Design

MOSFET Modeling for RF IC Design

High-frequency small signal AC and noise modeling of MOSFETs for RF IC design

An Improved RF MOSFET Model Accounting Substrate Coupling among Terminals

Scalable RFCMOS Model for 90 Nm Technology

Flicker Noise Characterization and Modeling of MOSFETs for RF IC Design

MOS transistor modeling for RF IC design

Physical design optimization of MOSFETs for millimeter wave and sub-millimeter wave circuits

High-frequency Characterization and Modeling of Distortion Behavior of MOSFETs for RF IC Design

An MOS transistor model for RF IC design valid in all regions of operation

A Study of Advanced Modeling Methodology of CMOS-compatible RF-MEMS Devices for Integrated Circuit Design

Nonlinear Modeling of RF Switch Based on COMSOL Parameter Extraction

Accurate Small Signal Modeling and Extraction of Silicon Mosfet for Rf Ic Application

Improved Compact RF-Noise Modelling for Deep SubMicron MOSFETs

A High-Frequency MOS Transistor Model and its Effects on Radio-Frequency Circuits

An Approach to Determine Noise Model Parameter for Submicron MOSFET from RF Noise Figure Measurement

Frequency-dependent resistive and capacitive components in RF MOSFETs

RF MOSFET: recent advances, current status and future trends

Noise modeling for RF CMOS circuit simulation